Frigidaire Dishwasher Troubleshooting Guide

When your Frigidaire dishwasher isn’t working properly, it can be frustrating. However, many common issues can be easily resolved with the right troubleshooting. In this comprehensive guide, we will provide you with step-by-step instructions and tips to help you troubleshoot and fix various Frigidaire dishwasher problems. From error codes to drainage issues, we’ve got you covered.

Key Takeaways:

  • Frigidaire professional dishwasher troubleshooting
  • Frigidaire dishwashing machine problems
  • How to fix Frigidaire dishwasher issues
  • Frigidaire dishwasher error codes
  • Troubleshooting Frigidaire professional series dishwasher

How Frigidaire Dishwashers Work

Frigidaire dishwasher operation

To effectively troubleshoot your Frigidaire dishwasher, it’s important to understand how it works. Frigidaire dishwashers go through a series of steps to ensure your dishes come out clean and dry. Let’s take a closer look at the operation, components, and cleaning process of a Frigidaire dishwasher.


1. Water Intake: The dishwasher starts by pumping water into the appliance from the water supply line. The incoming water is heated to the correct temperature to optimize cleaning and sanitization.

2. Detergent Dispenser: At the appropriate time during the cycle, the detergent dispenser releases the detergent into the dishwasher. This allows the detergent to mix with the water for effective cleaning.

3. Spray Arms: Frigidaire dishwashers feature spray arms with pressurized jets of water. These spray arms rotate during the cleaning process, directing the streams of water onto the dishes to remove food particles and stains.

4. Drainage: After the cleaning cycle, the dirty water is drained from the dishwasher. The drainage system ensures that the dirty water is effectively removed and does not linger in the appliance.

5. Rinse Cycle: Once the dirty water is drained, the dishwasher goes through a rinse cycle. Fresh water is sprayed onto the dishes to remove any remaining detergent or food residue.

6. Drying: Finally, a heated drying function activates to dry the dishes. This ensures that your dishes come out sparkling clean and ready to be put away.


Frigidaire dishwashers consist of various components that work together to ensure efficient cleaning. These components include:

  • Spray Arms
  • Water Inlet Valve
  • Drain Pump
  • Detergent Dispenser
  • Heating Element
  • Control Panel
  • Door Latch
  • Filters

Each component plays a crucial role in the overall operation and performance of the dishwasher.

Cleaning Process:

The cleaning process of a Frigidaire dishwasher involves several steps to ensure thorough cleaning and sanitation:

  1. Filling the dishwasher with water at the correct temperature
  2. Releasing detergent at the appropriate time
  3. Using pressurized jets of water to clean the dishes
  4. Draining the dirty water
  5. Rinsing the dishes with fresh water
  6. Drying the dishes with a heated drying function

By following this cleaning process, Frigidaire dishwashers deliver outstanding cleaning performance for your dishes.

Signs and Symptoms of Dishwasher Issues

Excess water in the bottom

If your Frigidaire dishwasher is not working properly, there are several signs and symptoms to watch out for. By identifying these common issues, you can troubleshoot and resolve problems with your dishwasher effectively.

Dirty Dishes at End of Cycle

One of the most frustrating problems is finding dirty dishes at the end of a dishwasher cycle. This may indicate clogged spray arms, a malfunctioning wash impeller, or a problem with the water supply. Make sure to check these components and clean or replace them if necessary.

Lack of Heat

If your dishwasher isn’t heating up during the wash or dry cycles, it could be due to a faulty heating element or thermostat. Inspect these parts for any damage or wear and consider replacing them to restore the heat and ensure proper cleaning and drying.

Excess Water in the Bottom

Finding excess water in the bottom of the dishwasher after a cycle may be caused by a clogged drain hose or a malfunctioning drain pump. Check these components for any obstructions or damage, and clear or replace them as needed to prevent water accumulation.

Door Latch Problems

A faulty door latch can prevent your Frigidaire dishwasher from starting or completing a cycle. Ensure that the door latches securely and does not appear damaged or worn. If necessary, replace the latch to ensure proper operation.

Water Leakage

If you notice water leaking from your dishwasher, it could be due to a damaged door gasket or seal. Inspect these components for any cracks, tears, or misalignments, and replace them to eliminate the leakage.

Overfilling or Underfilling

Frigidaire dishwashers are designed to fill up with the appropriate amount of water for each cycle. If you observe overfilling or underfilling, check the water inlet valve and the float assembly for any issues. Adjust or replace these components to ensure the correct water level.

By paying attention to these signs and symptoms, you can quickly identify and troubleshoot common issues with your Frigidaire dishwasher. Addressing these problems promptly will help ensure efficient and reliable performance for years to come.

Troubleshooting a Frigidaire Dishwasher

Frigidaire dishwasher leaking

If you’re experiencing issues with your Frigidaire dishwasher, don’t fret. In this section, we will provide you with step-by-step instructions to help you troubleshoot common problems. From leaky doors to power supply issues, we’ll guide you through the process of identifying and resolving the problem. By following these troubleshooting tips, you may be able to save time and money on costly repairs.

Problem: Leaky Doors

If you find that water is leaking from your Frigidaire dishwasher doors, there are a few potential causes to investigate. One common culprit is a faulty door gasket. Inspect the gasket for any signs of wear or damage, such as cracks or tears. If you notice any issues, replace the gasket with a new one. Additionally, check for any obstructions or debris around the door area that may be preventing a proper seal. Clear away any blockages and ensure that the door is closing securely.

Problem: Power Supply Issues

If your Frigidaire dishwasher is not turning on or experiencing intermittent power issues, check the power supply. Start by ensuring that the dishwasher is properly plugged into the electrical outlet. If it is plugged in, test the outlet by connecting another device to see if it works. If the outlet is functioning correctly, move on to checking the circuit breaker. Sometimes, a tripped breaker can cause power disruptions to the dishwasher. If the circuit breaker is tripped, reset it and see if that solves the issue.

Problem: Draining Problems

A common issue in dishwashers is poor drainage, which can result in standing water at the bottom of the appliance. Start by checking the drain hose for any kinks or clogs. If you find any obstructions, remove them and ensure that the hose is properly connected to your plumbing system. Next, inspect the drain pump and filter for any debris. Clean these components if necessary. If you have followed these troubleshooting steps and the draining problem persists, there may be an issue with the dishwasher’s drain pump that requires professional repair.

Problem: Error Codes

If your Frigidaire dishwasher displays error codes, consult the user manual to identify the specific issue indicated by the code. Each error code corresponds to a different problem, such as a faulty sensor or a malfunctioning component. Once you have identified the error code, follow the recommended troubleshooting steps in the manual. In some cases, resetting the dishwasher by unplugging it from the power source for a few minutes and then plugging it back in can resolve minor error codes.

Problem: Dishwasher Not Cleaning Properly

If your dishes are not coming out clean after a dishwasher cycle, there are a few possible causes. Insufficient water pressure or a clogged spray arm can hinder the cleaning process. Check the water supply line to ensure it is fully open and free from any obstructions. Additionally, remove the spray arm and clean it thoroughly to remove any debris or mineral buildup. It’s also important to use the correct amount and type of detergent for optimal cleaning performance. Adjusting these factors can help improve the cleaning efficacy of your Frigidaire dishwasher.

Problem: Unresponsive Control Panel

If the control panel of your Frigidaire dishwasher does not respond when buttons are pressed, a reset may be necessary. Start by unplugging the dishwasher from the power source for a few minutes, then plug it back in. This can often resolve temporary glitches in the control system. If the issue persists, there may be a faulty component or wiring problem that requires professional repair.

By following these troubleshooting tips, you can address common problems with your Frigidaire dishwasher and potentially resolve the issues without the need for professional assistance. However, keep in mind that some problems may require the expertise of a qualified technician. If you are unsure or uncomfortable performing any repairs, it is best to consult a professional to ensure the safety of both you and your dishwasher.

Frigidaire Dishwasher Leaking onto the Floor

Frigidaire Dishwasher Leaking onto the Floor

One common issue with Frigidaire dishwashers is water leakage onto the floor. This can be caused by several factors, including a faulty door gasket or seal, damaged hinges, faulty wash arms, or a stuck water inlet valve. Identifying and troubleshooting these components can help you resolve the leakage problem. Here’s a step-by-step guide to inspect and address these potential issues:

1. Check the Door Gasket

The door gasket is a rubber seal that prevents water from leaking out of the dishwasher. Over time, it can become worn or damaged, leading to leaks. Inspect the gasket for any visible signs of wear, such as cracks or tears. If you notice any damage, replace the door gasket to ensure a proper seal.

2. Examine the Door Seal

Similar to the door gasket, the door seal also plays a crucial role in preventing leaks. Inspect the seal for any signs of damage or wear. If you notice any issues, such as loose or torn sections, replace the door seal to ensure an effective seal between the dishwasher door and tub.

3. Check the Hinges

Inspect the hinges of the dishwasher door for any damage or misalignment. If the hinges are damaged or not properly aligned, it can cause gaps between the door and the dishwasher tub, leading to water leakage. Tighten any loose hinges or replace them if necessary.

4. Inspect the Wash Arms

Check the wash arms for any clogs or damage that may affect their ability to distribute water evenly. Clogs can prevent proper water flow, causing water to leak from other areas of the dishwasher. Clean the wash arms thoroughly or replace them if needed.

5. Test the Water Inlet Valve

A stuck or faulty water inlet valve can cause the dishwasher to continuously fill with water, leading to leaks. To test the water inlet valve, turn off the dishwasher and disconnect it from the power source. Locate the valve and inspect it for any debris or damage. Clean the valve and ensure it opens and closes properly. If the valve is faulty, consider replacing it to resolve the issue.

By following these troubleshooting steps, you can address the common causes of water leakage in your Frigidaire dishwasher. If the problem persists or you’re unsure about performing the repairs yourself, it’s always best to consult a professional appliance repair technician.

Potential CauseTroubleshooting Steps
Faulty Door GasketInspect for damage and replace if necessary
Damaged Door SealCheck for wear and tear, replace if needed
Misaligned or Damaged HingesTighten or replace hinges as required
Clogged or Damaged Wash ArmsThoroughly clean or replace wash arms
Stuck or Faulty Water Inlet ValveClean or replace the water inlet valve

Frigidaire Dishwasher Won’t Start (No Power)

If your Frigidaire dishwasher refuses to start, it’s essential to investigate the power supply as the potential culprit. Follow these simple steps to troubleshoot the issue:

  1. Check the electrical outlet: Ensure that the dishwasher is correctly plugged into a functioning electrical outlet. Test the outlet by plugging in a different appliance or device to verify if it is working.
  2. Power switch status: Confirm that the power switch on the dishwasher is turned on. Sometimes, it can inadvertently be left in the off position.
  3. Circuit breaker inspection: Examine the circuit breaker and make sure the corresponding switch for the dishwasher is in the ON position. If it is tripped, reset the breaker and attempt to start the dishwasher again.

By performing these checks, you can determine if the problem lies in the power supply.

Troubleshooting Checklist: Frigidaire Dishwasher Won’t Start

Possible CauseSolution
Inadequate power supplyVerify that the dishwasher is properly plugged into a functioning electrical outlet and that the power switch is turned on. Check the circuit breaker and reset if necessary.
Malfunctioning control panelIf the control panel is unresponsive, consider resetting the dishwasher by disconnecting power for a few minutes and then reconnecting it.
Door latch issueEnsure that the dishwasher door is fully closed and engaging the door latch mechanism. If the latch is damaged or faulty, it may need to be replaced.
Electrical component failureIf the dishwasher still won’t start, there may be a problem with internal electrical components. In this case, it is advisable to consult a professional appliance repair technician.

If the issue persists even after checking the power supply and following the troubleshooting checklist, it is recommended to seek professional assistance to diagnose and resolve the problem.

Frigidaire Dishwasher Has Power But Won’t Start

If your Frigidaire dishwasher has power but still won’t start, there are a few other factors to consider. Check if the child lock or delay start setting is activated, as these can prevent the dishwasher from starting immediately. Additionally, ensure that the door latch is properly engaged, as a faulty latch can prevent the dishwasher from starting. We will guide you through the troubleshooting steps for these issues.

If your Frigidaire dishwasher has a child lock feature, it may be enabled, preventing the appliance from starting. To disable the child lock, refer to your dishwasher’s user manual for specific instructions. Once the child lock is deactivated, you should be able to start the dishwasher as usual.

The delay start setting is another feature that may cause your Frigidaire dishwasher not to start immediately. If the delay start feature is enabled, the dishwasher will wait for the specified delay period before beginning its cycle. To start the dishwasher immediately, you will need to disable the delay start feature. Again, consult your user manual for detailed instructions on how to disable the delay start setting.

Another common issue that can prevent your Frigidaire dishwasher from starting is a faulty door latch. The door latch ensures that the dishwasher door is securely closed and allows the cycle to begin. If the door latch is not engaging properly, the dishwasher will not start. Inspect the door latch and make sure it is free from any obstructions or debris. If necessary, clean or replace the door latch to resolve the issue.

In summary, if your Frigidaire dishwasher has power but won’t start, check if the child lock or delay start setting is activated and disable them as needed. Additionally, inspect the door latch to ensure it is properly engaged. By troubleshooting these factors, you can resolve the issue and get your Frigidaire dishwasher up and running again.

Dishwasher Not Cleaning Dishes Properly

If your Frigidaire dishwasher is not cleaning dishes properly, it can be frustrating and leave you with unsatisfactory results. However, there are several potential causes to investigate in order to resolve this issue.

Check the Water Supply Line

Start by inspecting the water supply line for any obstructions or kinks that may restrict water flow to the dishwasher. Ensure that the valve is fully open and there are no leaks. A compromised water supply line can result in inadequate water reaching the dishwasher, impacting its cleaning performance.

Verify Water Pressure

Next, make sure that the water pressure is at the appropriate level. Low water pressure can hinder the dishwasher’s ability to effectively clean your dishes. Check your home’s water pressure and make sure it falls within the recommended range for your Frigidaire dishwasher.

Examine the Wash Arms

The wash arms are responsible for distributing water and detergent throughout the dishwasher to clean the dishes. Inspect the wash arms for any damage, such as cracks or blockages. If you notice any clogs, carefully remove debris to restore the proper water flow. Clean the wash arms thoroughly to ensure they are free from residue or buildup that could hinder their functionality.

Perform Spray Arm Maintenance

Regular maintenance of the spray arms is essential for optimal cleaning performance. Remove the spray arms from the dishwasher and clean them thoroughly using a mixture of warm water and vinegar. This will help remove any buildup or debris that may be affecting their ability to spray water effectively.

Inspect the Wash Impeller

The wash impeller is responsible for creating the water pressure needed to clean the dishes. Check the wash impeller for any damage or signs of wear. If the impeller is damaged, it may need to be replaced to restore proper water flow and cleaning performance.

By addressing these potential issues with the water supply line, water pressure, wash arms, spray arm maintenance, and wash impeller, you can improve the cleaning performance of your Frigidaire dishwasher, ensuring sparkling clean dishes with every cycle.

Frigidaire Dishwasher Repair Manual

In some cases, you may need more in-depth information to troubleshoot and repair your Frigidaire dishwasher. We recommend consulting a reliable Frigidaire dishwasher repair manual. These manuals provide step-by-step instructions for diagnosing and fixing various dishwasher problems. Whether you’re attempting a DIY repair or need guidance on replacing specific dishwasher parts, a repair manual can be a valuable resource.

By following the instructions in a Frigidaire dishwasher repair manual, you can confidently take on DIY dishwasher repairs. These manuals offer detailed explanations and illustrations to help you navigate through the troubleshooting process. From identifying common issues to providing solutions, a repair manual can empower you to save time and money on professional repairs.

Additionally, a Frigidaire dishwasher repair manual can guide you through dishwasher parts replacement. From replacing a faulty pump or motor to installing a new control panel, these manuals provide the necessary information to tackle more complex repairs. With the right manual and tools, you can successfully complete the repair and get your dishwasher back in working order.


Congratulations on completing our comprehensive Frigidaire dishwasher troubleshooting guide! By following the step-by-step instructions and tips provided, you should now have the knowledge and confidence to diagnose and resolve common issues with your Frigidaire dishwasher.

Remember, the troubleshooting process may vary depending on the specific problem you’re experiencing, but the guide has equipped you with the essential tools to get started. From leaks to power issues to cleaning problems, we’ve covered a range of common dishwasher issues and their potential solutions.

However, if you’re unsure or uncomfortable with DIY repairs, it’s always best to seek the assistance of a professional appliance repair technician. They have the expertise and resources to tackle more complex problems and ensure your dishwasher is running smoothly once again.


What are some common signs that my Frigidaire dishwasher may be experiencing difficulties?

Some common signs include dirty dishes at the end of the cycle, lack of heat, excess water in the bottom of the dishwasher, problems with the door latch, water leakage, and overfilling or underfilling.

How can I troubleshoot my Frigidaire dishwasher?

You can troubleshoot your Frigidaire dishwasher by checking for water leakage, ensuring that the power supply is connected properly, checking if the child lock or delay start setting is activated, and examining the water supply line, wash arms, and wash impeller for any issues.

Why is my Frigidaire dishwasher leaking onto the floor?

Your Frigidaire dishwasher may be leaking onto the floor due to a faulty door gasket or seal, damaged hinges, or faulty wash arms. A stuck water inlet valve can also cause the dishwasher to continuously fill with water, resulting in leaks.

What should I do if my Frigidaire dishwasher won’t start?

If your Frigidaire dishwasher won’t start, check the power supply by ensuring it is properly plugged into an electrical outlet and that the power switch is turned on. You should also check the circuit breaker to ensure it is in the correct position. Additionally, make sure the door latch is properly engaged.

Why is my Frigidaire dishwasher not cleaning dishes properly?

Your Frigidaire dishwasher may not be cleaning dishes properly due to issues with the water supply line, inadequate water pressure, damaged or clogged wash arms, or a malfunctioning wash impeller. Addressing these factors can improve the cleaning performance of your dishwasher.

Source Links