Whirlpool Washer LOC Code: Quick Unlock Tips

Did you know that the control lock feature on Whirlpool washers has caused frustration for thousands of users?

If you’ve ever encountered the dreaded “LoC” or “LC” code on your Whirlpool washer, you’re not alone. This error code indicates that the control lock has been activated, rendering the controls unresponsive. While the door can still be opened, the machine won’t function until the control lock is deactivated.

But fear not! In this article, we will provide you with a comprehensive guide on how to unlock your Whirlpool washer, allowing you to get back to your laundry tasks quickly and easily.

Key Takeaways:

Whirlpool washers may display the “LoC” or “LC” code when the control lock is activated.
The control lock prevents the controls from functioning, but the door can still be opened.
You can easily deactivate the control lock by following a few simple steps.
If the standard method doesn’t work, there are alternative methods to try.
Always prioritize safety when troubleshooting your Whirlpool washer.

Activating the Control Lock

To activate the control lock on your Whirlpool washer, simply follow these steps:

Locate the “Control Lock” button on the control panel.
Press and hold the “Control Lock” button for 3 seconds.
As you hold down the button, the display will count down from 3 to 1.
You will see the code “LC” or “LoC” on the display, confirming that the control lock is now active.

The control lock feature is designed to prevent unwanted changes or operation of the washer. By activating the control lock, you can ensure that the settings stay intact while the machine is in use.

Button Location	Control Lock Activation Process	Code Confirmation
Control panel	Press and hold “Control Lock” for 3 seconds	“LC” or “LoC” displayed

Please note that the location of the “Control Lock” button may vary depending on your specific Whirlpool washer model. Refer to your owner’s manual for detailed instructions on activating the control lock for your particular machine.

Deactivating the Control Lock

To deactivate the control lock on your Whirlpool washer, simply follow a similar process as activating it. Press and hold the control lock button again for 3 seconds. As you do this, the display will count down from 3 to 1, and the code “LC” or “LoC” will disappear, indicating that the control lock has been successfully deactivated.

Once the control lock is deactivated, you can now use the washer controls as normal, allowing you to select your desired settings and start a new cycle.

If you’re unsure which button controls the lock or need further assistance, refer to your owner’s manual or contact Whirlpool’s customer support for guidance and troubleshooting tips.

Alternative Methods to Deactivate the Control Lock

If the standard method of deactivating the control lock doesn’t work for your Whirlpool washer, there are alternative methods you can try.

Method 1: Press the power button

If the control lock persists, try pressing the power button on your Whirlpool washer before attempting to deactivate the control lock. This simple step may help reset the controls and unlock the machine.

Method 2: Unplug the machine or turn off the breaker

If the power button method doesn’t work, you can also try more aggressive steps to reset the controls. Unplug the machine from the power outlet or turn off the breaker that supplies power to the washer. Leave it unplugged or with the power off for at least 1 minute. This can help clear any temporary glitches and allow you to deactivate the control lock.

Method 3: Dual-function button

Some Whirlpool washer models may have a dual-function button that requires a specific button to be pressed and held for 3 seconds to unlock the control panel. Look for a button that is not labeled as a text button, but has a different function associated with it. Press and hold this button for 3 seconds, and the control panel should unlock.

If these alternative methods don’t work or you have other concerns, consult your owner’s manual or contact Whirlpool’s customer support for further troubleshooting assistance.

Additional Tips and Information

When dealing with the loc code on your Whirlpool washer, it’s important to understand that it is different from the “Door Locked” signal. Even when the control lock is activated, you can still open the door; however, the washer will not start until the control lock is deactivated. If you’re unsure about the specific steps to unlock your machine, there are a few resources you can turn to for assistance: your owner’s manual or Whirlpool’s customer support.

To unlock your Whirlpool washer, consult your owner’s manual for detailed instructions specific to your model. The manual will provide step-by-step guidance on how to deactivate the control lock. If you don’t have your manual handy, you can visit Whirlpool’s website and enter your washer’s model number to access online manuals and troubleshooting guides. Having your model number readily available will help you quickly find the relevant information.

If you prefer direct assistance, Whirlpool’s customer support team is available to help you navigate through the unlocking process. They are knowledgeable about Whirlpool washers and can provide personalized support and troubleshooting tips. Contacting customer support is particularly helpful if you encounter any challenges or have specific questions related to your washer’s loc code.

Note: It is advisable to avoid attempting potentially risky steps beyond the recommended troubleshooting methods. Always prioritize your safety and follow the instructions provided by the manufacturer or customer support.

Whirlpool Washer Model Numbers

Washer Model	Location
WFW5620HW	Inside the door, on the rim
WTW5000DW	Under the lid, on the back top panel
WFW6620HW	Inside the door, on the rim

Troubleshooting Other Error Codes

While the LOC code is a common error on Whirlpool washers, it’s important to note that there are also other error codes that may indicate different issues with your machine. Here are a few examples:

Lo FL code: This code is specific to front-loading washers and indicates a low flow of water. If you see this code, it could indicate a problem with the water supply or the water inlet valve.
ob code: The ob code indicates an out-of-balance condition. This could be caused by an uneven load or a problem with the washer’s suspension system.

If you encounter any other error codes on your Whirlpool washer, don’t panic. Consult your owner’s manual for a list of error codes specific to your model and follow the troubleshooting steps provided. If you’re unable to resolve the issue on your own, don’t hesitate to reach out to Whirlpool’s customer support for further assistance.

It’s important to address error codes promptly to prevent further damage to your washer and ensure its optimal performance. By understanding the meaning behind these codes and taking appropriate troubleshooting steps, you can effectively resolve any issues and get your Whirlpool washer back to working condition.

Unlocking the Washer Door Mid-Cycle

If you find yourself needing to unlock the door of your Whirlpool washer during a cycle, there are a few methods you can try.

One simple method is to press and hold the cancel button on the control panel. This will stop the load and turn off the machine, bypassing any locking mechanisms, including the control lock. Once the machine is turned off, you can safely open the door.

If you have a top-loading washer, another method is to pause the cycle by pressing the start/stop button. This allows you to add any extra garments or make adjustments before resuming the cycle. The door will remain unlocked during the pause.

Consult Your Owner’s Manual

It’s important to note that these methods may vary depending on the specific model of your Whirlpool washer. For detailed and model-specific instructions, always consult your owner’s manual. It will provide you with the most accurate and relevant guidance for unlocking the door mid-cycle.

Image:

By following the appropriate method for your washer model, you can easily unlock the door and make any necessary changes during a cycle. Always remember to exercise caution and refer to your owner’s manual for guidance.

Unlocking the Washer Door With Power Off

If your Whirlpool washer is completely powered off and the door is still locked, don’t worry! There is a method to manually unlock it. Follow these steps:

First, make sure the machine is unplugged and the water supply is turned off.
Locate the drain pump access door on your washer.
Unscrew the cover of the drain pump access door to reveal the compartment.
Inside the compartment, you should find a plastic cord or strap.
Pull the plastic cord or strap to unlock the door.
Once the door is unlocked, secure the access compartment by screwing the cover back in place.
Finally, plug in and power on your washer.

Now you should be able to access the washer door and resume your laundry tasks as needed.

Note: The image above illustrates the process of unlocking the washer door with power off.

Safety Precautions and Further Assistance

When dealing with the Whirlpool washer LOC code or any other error code, it’s crucial to prioritize safety and take the necessary precautions. Ensure that you follow the instructions provided in your owner’s manual to avoid any mishaps. Before attempting any troubleshooting steps, make sure that the machine is powered off and unplugged to reduce the risk of electrical accidents.

If you are unsure about any step or have concerns, it is highly recommended to contact Whirlpool’s customer support for expert assistance. They have a team of knowledgeable professionals who can provide you with further guidance and address any specific concerns you may have about your Whirlpool washer. They are equipped to handle a wide range of issues and can provide you with tailored solutions.

Always remember that your safety is of utmost importance. Prioritize safety and exercise caution when attempting any troubleshooting or repair work on your Whirlpool washer.

Whirlpool’s customer support team can also help you with important information on Whirlpool washer error codes and their respective troubleshooting steps. They can guide you through the process of identifying and resolving the error you are facing. Additionally, they can provide you with information on Whirlpool washer safety precautions to ensure that you and your appliance are protected during use.

Whirlpool Customer Support Contact Details:

Phone: 1-800-253-1301
Email: support@whirlpool.com
Website: Whirlpool Customer Support

Whirlpool Customer Support	Contact Details
Phone	1-800-253-1301
Email	support@whirlpool.com
Website	Whirlpool Customer Support

By reaching out to Whirlpool’s customer support, you’ll receive the necessary assistance from professionals who are well-versed in Whirlpool washers and can guide you towards a resolution. Remember to provide them with relevant details, such as your Whirlpool washer model number, to ensure accurate guidance.

Conclusion

Dealing with a loc code on your Whirlpool washer can be frustrating, but with the help of this comprehensive guide, you can quickly resolve the issue and get back to doing your laundry effortlessly. By following the step-by-step instructions provided, you should be able to unlock the control panel and continue using your washer without any hassle.

Remember to keep your Whirlpool washer’s model number and owner’s manual handy for easy reference. If you encounter any difficulties or have further questions, don’t hesitate to contact Whirlpool’s customer support for expert assistance. They are available to provide additional guidance and address any specific concerns you may have regarding your washer.

With a little troubleshooting and utilizing the information shared in this guide, you’ll be able to overcome the loc code error on your Whirlpool washer and enjoy clean, fresh laundry in no time. So go ahead, try the solutions outlined, and say goodbye to control lock frustration!

FAQ

What does the "LoC" or "LC" code mean on my Whirlpool washer?

The “LoC” or “LC” code indicates that the control lock has been activated. This feature prevents the controls from functioning, but the door can still be opened.

How do I activate the control lock on my Whirlpool washer?

To activate the control lock, press and hold the specific button labeled “Control Lock” or with a lock symbol on it for 3 seconds. The display will count down from 3 to 1, and you will see the code “LC” or “LoC” confirming that the control lock is active.

How do I deactivate the control lock on my Whirlpool washer?

To deactivate the control lock, press and hold the control lock button again for 3 seconds. The display will count down from 3 to 1, and the code “LC” or “LoC” will disappear, indicating that the control lock has been deactivated.

What should I do if the standard method of deactivating the control lock doesn’t work?

If the standard method doesn’t work, try pressing the power button before attempting to deactivate the control lock. If that doesn’t work, try unplugging the machine or turning off the breaker for 1 minute to reset the controls. Some models may have a dual function button, where you need to press and hold a specific button (not the text below it) for 3 seconds to unlock the control panel.

Can I unlock the door while the control lock is active?

Yes, even when the control lock is activated, the door can still be opened. However, the washer will not start until the control lock is deactivated.

What should I do if I encounter other error codes on my Whirlpool washer?

Consult your owner’s manual or contact Whirlpool’s customer support for further troubleshooting steps. Each error code may indicate a different issue with your machine.

How can I unlock the door of my Whirlpool washer during a cycle?

Press and hold the cancel button to stop the load and turn off the machine. This bypasses any locking mechanism, including the control lock. For top-loading washers, you can also pause the machine by pressing the start/stop button and add extra garments before resuming the cycle. Refer to your owner’s manual for model-specific instructions.

How can I manually unlock the door if the washer is powered off?

If the washer is completely powered off and the door is locked, make sure the machine is unplugged and the water supply is turned off. Locate the drain pump access door, unscrew the cover, and pull the plastic cord or strap inside to unlock the door. Secure the access compartment before plugging in and powering on the washer.

What safety precautions should I follow when troubleshooting my Whirlpool washer?

Prioritize safety by following the instructions in your owner’s manual. Ensure the machine is powered off and unplugged before attempting any troubleshooting steps. If you have concerns or encounter difficulties, contact Whirlpool’s customer support for expert assistance.

Where can I find further assistance for my Whirlpool washer?

Contact Whirlpool’s customer support for additional guidance. They can provide further troubleshooting steps and address any specific concerns you may have. It’s helpful to have your washer’s model number on hand when seeking support.