If your Bosch dishwasher is displaying the error code E15, don’t worry! We’re here to help you fix it. The E15 error code indicates that there is water in the base of the dishwasher, but with a few simple steps, you can get your dishwasher back up and running smoothly.
In this guide, we’ll walk you through the process of troubleshooting and fixing a Bosch dishwasher with the E15 error. We’ll cover everything from understanding the error code to removing the water from the dishwasher base and resetting the safety switch. By following these steps, you can resolve the E15 error code and prevent any further damage to your dishwasher or home.
Key Takeaways:
- The Bosch E15 error code indicates water in the base of the dishwasher.
- Performing a hard reset can clear the error code temporarily.
- Tilting the dishwasher can provide a quick fix, but it may cause further damage.
- Removing the water from the dishwasher base and resetting the safety switch can fix the error code.
- Check for other potential causes, such as using the wrong detergent or damaged spray arms.
Understanding the Bosch Dishwasher E15 Error Code
The Bosch E15 error code on your dishwasher indicates an issue with the water level in the dishwasher’s base. While the most common cause is an excess of water, the error code can also be triggered by a control board glitch. Let’s take a closer look at how to tackle this error code:
If the E15 error code was caused by a control board glitch, a hard reset can be a simple solution. To perform a hard reset, disconnect the power to the dishwasher for approximately five minutes. This should clear the error code. However, if the error code reappears, it’s essential to address the water accumulation in the dishwasher’s base.
The water in the dishwasher’s base can be removed by following the troubleshooting steps outlined in the next sections. This will prevent further damage to the dishwasher and potential leaks in your home. Let’s explore these solutions in more detail.
Quick Fix: Tilt the Dishwasher
If you’re looking for a quick solution to clear the Bosch dishwasher E15 error code, you can try tilting the dishwasher backward at a 45-degree angle. While this method may temporarily clear the error code, it is important to note that it is not a long-term fix and may potentially cause further damage to the dishwasher.
By tilting the dishwasher, you may be able to remove the water in the base that triggered the E15 error code. However, tilting the dishwasher will not address the underlying cause of the error, which could be a potentially dangerous leak.
It is recommended to exercise caution when tilting the dishwasher and to avoid placing excessive pressure on any part of the appliance to minimize the risk of further damage.
If you choose to proceed with tilting the dishwasher, follow these steps:
- Ensure the dishwasher is completely disconnected from the power supply.
- Gently tilt the dishwasher backward at a 45-degree angle, using caution and ensuring no excessive force is applied.
- Hold the dishwasher in this position for a few minutes to allow any excess water to drain out.
- Gently move the dishwasher back to its original position.
Keep in mind that tilting the dishwasher is a temporary measure, and it is important to investigate and address the underlying cause of the E15 error code to prevent its recurrence. If the error code persists or if you’re unsure about performing any troubleshooting steps, it is recommended to contact a qualified technician or the manufacturer for further assistance.
Remember, tilting the dishwasher is a quick fix to clear the E15 error code, but it does not address the root cause. It’s important to investigate and resolve the underlying issue to ensure the proper functioning of your Bosch dishwasher.
Removing the Water from the Dishwasher Base
If you’re attempting to resolve the E15 error code on your Bosch dishwasher, one method you can try is to remove the water from the dishwasher base. This process involves carefully tilting the dishwasher back at a 45-degree angle. By doing so, the water in the base should come out, clearing the error code. However, before attempting this method, it’s crucial to disconnect the power and water from the dishwasher and place something underneath to catch the water that comes out.
Here’s a step-by-step guide on how to remove the water from the dishwasher base:
- Pull the dishwasher out from under the kitchen cabinet, ensuring it is accessible for tilting.
- Carefully tilt the dishwasher back at a 45-degree angle. This will allow the water in the base to flow out.
- Make sure to disconnect the power supply and water source before moving the dishwasher to avoid any electrical or water-related hazards.
- Place a container or absorbent material underneath the dishwasher to collect the water that comes out.
- Once the water has been drained, carefully move the dishwasher back to its original position.
- Reconnect the power supply and water source to the dishwasher.
- Restore power and turn on the dishwasher to check if the E15 error code has been cleared.
If the error code persists after following these steps, it is advisable to explore other troubleshooting methods or seek professional assistance.
| Component | Location | Function |
|---|---|---|
| Basin | At the center of the dishwasher | Collects water during the dishwashing process |
| Polystyrene Disk | Above the basin | Floats with the water level and activates the safety switch |
| Safety Switch | Positioned above the polystyrene disk and basin | Triggers the E15 error code when activated by the polystyrene disk |
This mechanism ensures that any abnormal accumulation of water is detected promptly, safeguarding your dishwasher and home from potential damage. Now that you understand how the safety switch works, let’s delve into troubleshooting steps to resolve the Bosch dishwasher E15 error code in the subsequent sections.
Resetting the Safety Switch
To resolve the E15 error code on your Bosch dishwasher, you will need to reset the safety switch. Follow the steps below:
- Step 1: Carefully twist the safety switch to the side and pull it out to remove it from the dishwasher.
- Step 2: Once the safety switch is removed, take out the polystyrene disk and mop up any water in the basin.
- Step 3: Thoroughly dry the polystyrene disk before proceeding.
- Step 4: Check the basin for any obstructions that could interfere with the safety switch process.
- Step 5: Place the polystyrene disk and the safety switch back into the basin.
- Step 6: Inspect the wiring for any damage and ensure there are no leaks from hoses or the water tank.
- Step 7: Reassemble the dishwasher by following the manufacturer’s instructions.
Resetting the safety switch should clear the E15 error code on your Bosch dishwasher. However, if the error code persists, it is recommended to contact a qualified technician for further assistance.
Checking for Other Causes of the E15 Error Code
While water accumulation in the base of the dishwasher is the most common cause of the Bosch E15 error code, there are other factors that can trigger this issue. It’s important to consider these potential causes and address any underlying problems to prevent future occurrences of the error code.
Wrong Detergent
Using the wrong detergent in your Bosch dishwasher can lead to the E15 error code. Ensure that you are using a detergent specifically designed for dishwashers and suitable for your Bosch model.
Excessive Detergent
Overloading the dishwasher with too much detergent can also trigger the E15 error code. Follow the manufacturer’s recommendations for detergent dosage and make sure you are using the appropriate amount for your dishwasher model.
Clogged or Damaged Spray Arms
If the spray arms in your dishwasher are clogged or damaged, they may not distribute water effectively, leading to water accumulation in the base. Inspect the spray arms for any blockages or signs of damage, such as cracked or bent arms.
Leak in the Sump Basin or Hoses
A leak in the sump basin or hoses can also result in the E15 error code. Inspect these components for any signs of leakage or damage. Check for loose connections and tighten them if necessary. If you detect a leak, it’s crucial to fix the issue promptly to prevent further damage to your dishwasher and potential water damage to your home.
By addressing these potential causes and resolving any issues found, you can effectively troubleshoot the Bosch E15 error code and prevent its recurrence.
| Potential Causes of E15 Error Code | Solutions |
|---|---|
| Using the wrong detergent | Ensure the use of dishwasher-specific detergent |
| Excessive detergent usage | Follow dosage recommendations for your dishwasher model |
| Clogged or damaged spray arms | Inspect and clean or replace spray arms if necessary |
| Leak in sump basin or hoses | Meticulously check for leaks and repair as needed |
Bosch’s Official Advice
If you’re unable to troubleshoot and fix the Bosch dishwasher E15 error code using the suggested steps, Bosch recommends seeking assistance from a qualified technician. Professional help may be necessary to replace any faulty components and ensure the proper functioning of your dishwasher.
However, before reaching out to a professional, you can attempt the troubleshooting steps outlined in this guide. These steps are designed to help you resolve common issues related to the E15 error code in your Bosch dishwasher.
Common Bosch Dishwasher Models Affected by the E15 Error Code
If you own a Bosch dishwasher and are experiencing the E15 error code, you’re not alone. This error code can affect various Bosch dishwasher models, including:
- GM926710
- SHE43P25UC/64
- SHE45M05UC/50
- SHE45M06UC/50
- SHE4AP06UC/06
- SHE55M12UC/64
- SHE55M15UC/64
- SHE55M16UC/64
- SHE58C05UC/48
- SHI4302
- SHI4306
- SHI6802
If you own any of these models and are experiencing the E15 error code, don’t worry. There are solutions available to fix the issue and get your dishwasher back up and running efficiently.
Please note that the E15 error code may also affect other Bosch dishwasher models not mentioned in this list. The troubleshooting steps provided in this guide are applicable to various models, so you can still follow them even if your specific model is not listed.
Conclusion
The Bosch dishwasher E15 error code can be a frustrating issue to encounter, but rest assured that there are steps you can take to resolve it. By following the troubleshooting methods outlined in this guide, you can effectively fix the E15 error code on your Bosch dishwasher and get it back to optimal working condition.
Firstly, it is important to clear the water in the base of the dishwasher. This can be done by carefully tilting the dishwasher or removing the water manually. Additionally, resetting the safety switch by removing and drying the polystyrene disk can help resolve the error code.
Furthermore, it is crucial to check for other potential causes of the E15 error code, such as using the correct detergent, inspecting spray arms for clogs or damage, and ensuring there are no leaks in the sump basin or hoses. Addressing these underlying issues can prevent future occurrences of the error code.
If you have followed the troubleshooting steps provided and the E15 error code persists, we recommend seeking assistance from a qualified technician. They have the expertise and knowledge to diagnose and fix any complex issues that may be causing the error code and ensure your Bosch dishwasher functions optimally.
FAQ
What does the Bosch dishwasher E15 error code mean?
The E15 error code indicates that there is water in the base of the dishwasher.
How can I fix the Bosch dishwasher E15 error?
To fix the E15 error, you can try performing a hard reset by disconnecting the power for five minutes or tilting the dishwasher backward at a 45-degree angle. However, these are temporary solutions, and it is recommended to remove the water from the base and reset the water level safety switch to fix the underlying issue.
How do I remove the water from the dishwasher base?
To remove the water from the dishwasher base, you will need to remove the outer door panel and kickplate, access the base of the dishwasher, and mop up the water using a cloth or sponge.
How do I reset the water level safety switch?
To reset the water level safety switch, you will need to remove the safety switch by twisting it to the side and pulling on it. Then, remove the polystyrene disk, mop up the water in the basin, dry the disk, and place the disk and safety switch back in the basin.
How does the safety switch work?
The safety switch is located in the base of the dishwasher and is activated by a polystyrene disk that floats up with the water. When there is too much water in the basin, the disk triggers the safety switch and causes the E15 error code.
What are other possible causes of the E15 error code?
The E15 error code can also be triggered by using the wrong detergent, too much detergent, clogged or damaged spray arms, or a leak in the sump basin or hoses.
Should I call a technician to fix the E15 error code?
While Bosch recommends calling a qualified technician to fix the E15 error code, you can try troubleshooting and fixing the issue yourself using the steps provided. However, if the problem persists, it is best to seek professional help.
Which Bosch dishwasher models are affected by the E15 error code?
The E15 error code can affect various Bosch dishwasher models, including GM926710, SHE43P25UC/64, SHE45M05UC/50, SHE45M06UC/50, SHE4AP06UC/06, SHE55M12UC/64, SHE55M15UC/64, SHE55M16UC/64, SHE58C05UC/48, SHI4302, SHI4306, and SHI6802.