Clicky

Frigidaire Dishwasher Diagnostic Mode Explained! (9 Codes)

Frigidaire dishwashers are some of the best models on the market. But while they hold high respect owing to the reputation of the brand, they can malfunction or fail to work altogether. That’s why it’s important to know about Frigidaire dishwasher diagnostic mode to help with easy troubleshooting.

Frigidaire dishwasher diagnostic mode makes it easy for you to identify and fix errors related to the unit. With the help of troubleshooting codes, it becomes easier to figure out what you have to fix, so you don’t have to end up wasting valuable time fixing the wrong problem.

In this guide, I’ll focus on running on a diagnostic mode on the Frigidaire dishwasher.

The goal is to help you run easy troubleshooting on your own, so you never have to consult a professional technician unless the issue is beyond your understanding.

Let’s get started.

Frigidaire Dishwasher Diagnostic Mode

How Do I Run a Diagnostic Mode on My Frigidaire Dishwasher?

To start the Frigidaire dishwasher diagnostic mode, long press the Start/Cancel button for about 3 to 5 seconds.

Now that you have the water test/service mode activated, press Start/Cancel to advance to settings.

Frigidaire Dishwasher Diagnostic Codes

The following are the Frigidaire dishwasher diagnostic codes you should know about:

 Error CodeCode MeaningQuick Fix
1.LODishwasher doesn’t have enough rinse aidRefill the unit with rinse aid to clear the error
2.PFIt indicates power outageReset the dishwasher to clear this error code
3.UFThe vent failed or its fan isn’t runningReplace the fan
4.rARinse aid switch failureRefill the dishwasher with the detergent
5.i60Failing heating elementReset the dishwasher to fix the error and clear the code
6.ERYour dishwasher has a stuck key or membrane switch failureReplace the keypad to clear the error
7.iC0Dishwasher has an electronic system control failureReset the unit, wait 10 minutes, and then  turn it back on.
8.RF and REThe rinse aid reed switch is openedReplace the dispenser assembly or refill the rinse aid dispenser
9.R50Drain problem and motor failureReset your dishwasher to fix error.

1. Code LO

If you see the error code LO on your Frigidaire dishwasher, it means the appliance has run low on rinse aid.  To fix this diagnostic code, refill the rinse aid dispenser with enough rinse aid for the unit. 

2. Code PF

The PF code is associated with power. It will show on the display when there is a possible power outage. To clear this code, consider resting the dishwasher by opening and closing its door.

3. Code UF

This error codes mean the dishwasher has a vent failure or the vent fan is not running.

The work of the vent fan is to drive out hot air and steam from the dishwasher. So, if this part fails, hot air and steam will not get out of the unit. Examine the vent assembly and the fan, and replace the fan if it is faulty.

4. Code rA

The fault code rA means your Frigidaire dishwasher is having a rinse aid’s reed switch failure.

You can fix the issue by correcting the wire connecting the main control board and the dispenser. Replace the dispenser assembly if necessary.

If everything is okay with the dispenser, try refilling the dispenser with dishwasher detergent.

5. Code i60

This error code means your dishwasher’s water heating system is failing. Fix the problem by restarting the dishwasher.

Just long-press the cancel button or turn off the power from the circuit breaker.

6. Code ER

The code implies there is a stuck key or membrane switch failure. Consider checking the main control board and the connection between keypads.

If the main control board is okay, consider replacing the keypad in case you can’t fix the stuck keys.

7. Code iC0

This error code means your dishwasher has an electronic system control failure. Fortunately, you can fix this issue by simply resetting the unit.

Long-press the cancel button or turn off the power from the circuit breaker and wait for about 5 to 10 minutes for the dishwasher to reset. 

8. Code RF and RE

These error codes suggest your dishwasher has an issue with the rinse aid’s reed switch. It means the reed switch is open.

You can fix the issue by replacing the dispenser assembly. In case the switch isn’t opened, try troubleshooting the issue by refilling the rinse aid dispenser and see what happens.

9. Code i50

The code means your Frigidaire dishwasher has a drain or wash motor failure.

You might fix the error by restarting the dishwasher. Press and hold the cancel button until the dishwasher restarts.

Frigidaire Dishwasher Troubleshooting: 8 Problems You Should Fix Immediately

The purpose of the Frigidaire dishwasher diagnostic mode is to make it easier for you to identify common problems causing the unit to fail.

In line with running the diagnostic mode, it’s important to do a Frigidaire dishwasher troubleshooting to find and fix the most common errors and get your unit working well again.

Here are 9 common problems as well as how to fix them:

1. The Dishwasher Has Water Supply Issues

The first possible reason your Frigidaire dishwasher isn’t working is that it is not getting water. This is usually the case when there is power but the dishwasher is not starting.

To solve water issues:

  • Check the water supply valve to ensure it is on.

Replace the water inlet valve immediately you notice that it’s stuck or faulty.

Edgewater Parts 154637401 dishwasher valve
  • Run a test to find to determine the unit’s water pressure, and make sure the flow in the dishwasher is at least 30psi.
  • Consider turning off any running tap or washing machine to boost the water pressure on the dishwasher.

Finish the troubleshooting by straightening kinks, unblocking, or replacing the drain hose if damaged.

2. Your Frigidaire Dishwasher Has Power Problems

Your dishwasher may fail to start, not because it has problems, but because there is a power supply issue.

To troubleshoot a Frigidaire dishwasher that won’t start because of power supply:

  • Check if you have properly plugged in the unit to a power source.
  • If you have plugged the unit to an extension cord, remove it. An extension codes can’t provide the power your Frigidaire dishwasher needs to run.

Also, your Frigidaire dishwasher comes with a circuit breaker that regulates the amount of power coming into the appliance. Inspect this circuit breaker and if tripped, put it back in its position.

Lastly, check the power switch located beneath the dishwasher and make sure it’s ON.

3. Your Frigidaire Dishwasher Settings are Incorrect

Frigidaire dishwashers don’t operate when you choose the wrong cycle.

To get your dishwasher to start and actually clean dishes, confirm that you’ve selected the right cycle before you push the start button.

4. Your Frigidaire Control Panel is Faulty

Also, you need to diagnose the control panel to make sure it’s in great condition. In some cases, keypads end up damaged if consistently subjected to wetness, which can cause communication issues with the appliance.

Consider having control panel changed if some of the buttons are not working.

frigidaire genuine OEM dishwasher control panel

You can replace just the keypads if you want to. But for the best results, I strongly recommend that you have the entire control panel changed.

5. Frigidaire Dishwasher Not Cleaning Dishes Properly

If your Frigidaire dishwasher isn’t cleaning dishes properly, it could be for the following reasons:

  • Water supply problem: Ensure your water line doesn’t leak or have kinks so that enough water can reach the appliance.
  • Wrong wash cycle: Make sure you select the right wash cycle for your dishes or they won’t come out clean.
  • Clogged spray arm:  Check the spray arm and clear any debris you find. When the food particles stick on the spray arm, enough water doesn’t hit the dirty dishes and that makes it difficult for the dishwasher to clean thoroughly.
  • Faulty Drain Pump: Consider replacing the drain pump if it’s faulty. Otherwise, your dishwasher may not be able to clean dishes properly.

6. Frigidaire Dishwasher Leaking Water

The Frigidaire dishwasher is leaking and flooding your kitchen floor because there is a gap caused by the wearing and tearing gasket and seals. 

If the gasket and door seal are in good condition, check the hinges to ensure they are not bent. Dishwashers with damaged door hinges should be replaced because they can make the door loose, causing water to flood your kitchen.

Faulty spray arms can make the dishwasher leak water to the floor. It is best to repair them if they have a loose screw or if cracked. 

Importantly, have a look at the inlet valve (the point at which water enters the dishwasher). Ensure that this part works properly.

It should shut right after enough water has filled the dishwasher. Otherwise, the dishwasher will overfill until it overflows or leaks. Replace the water inlet valve if you notice that it’s faulty.

7. Your Frigidaire Dishwasher Making Too Much Noise

The dishwasher will make noise if you don’t lock the door properly.

Make sure you close the door well and that there isn’t a broken hinge. Consider checking the seal around the door. Replace the seal if there is anything unusual with it.

Also, noise coming from the dishwasher can be an indication of a faulty part that requires immediate replacement.

Open the dishwasher, check which part has a problem, and fix accordingly to stop the noise.

8. Frigidaire Dishwasher Not Drying Dishes Properly

If your Frigidaire model has the drying function but the dishes are coming out still wet or not properly dried, the problem might be the heating element.

The heating element is located at the bottom of the dishwasher.

Use a multimeter to test for continuity. If the test results show that the heating element no longer has continuity, have it replaced with a new one. 

If your Frigidaire dishwasher comes with an evaporating technology to dry dishes, ensure there is no blocking in the vent so that steam and hot air can escape and leave your dishes dry.

Also, examine the vent motor (if your model has one) using a multimeter for continuity. Replace the fan motor if there’s no continuity.

9. Frigidaire Dishwasher Not Draining Properly

A Frigidaire dishwasher that is not draining properly is unhygienic. Microorganisms breed in the stagnant water and can cause diseases if not controlled.

The reason your dishwasher is not draining wastewater is that the filter is dirty, clogged, and blocked.

  • Remove the filter by pushing and twisting the lower spray arm anticlockwise.
  • Rinse the filter using running water to get rid of debris
  • Fix it back to its compartment

Another part that can cause the dishwasher not to drain is the drain hose. The drain hose takes out wastewater from the dishwasher and it loops from the dishwasher behind the sink.

  • Look for kinks and correct the ones you find.
  • In case there’s a block, disconnect the hose and clear the blockages keeping water from draining.

Frequently Asked Questions

1. Is There a Reset Button on Frigidaire Dishwasher?

Frigidaire dishwashers don’t have buttons labeled “Reset”. Instead, there’s a cancel button on the far right size of the control panel. You press this button if you would like to reset the dishwasher. 

2. How Do You Reset a Frigidaire Dishwasher?

To reset the dishwasher, press and hold down the cancel button for three second. You’ll notice that the light changes or disappears on the unit and then the dishwasher turns off.

Wait for 10 minute before turning the dishwasher on again.

3. Why Does My Frigidaire Dishwasher Not Starting?

Your Frigidaire dishwasher won’t start because there’s a power supply problem. Check to make sure that the power supply is on and that the circuit breaker is in the right position. This should fix the problem.

How do I know if my refrigerator compressor is working?

To determine if your refrigerator compressor is working properly, there are a few key indicators to look for. Firstly, when the compressor is functioning, you will typically hear a distinct clicking sound followed by a humming noise, indicating that it has been turned on and is actively running. This is a clear sign that the compressor is operational.

Another way to assess the functionality of the compressor is to observe the temperature inside the fridge. As the compressor works to cool down the interior, it will continue to run until the desired temperature is reached. Once this optimal temperature is achieved, the compressor will automatically turn off, resulting in a noticeable decrease in noise, making the refrigerator much quieter.

Therefore, by listening for the click and hum of the compressor when it is running, as well as monitoring the changes in noise when the refrigerator reaches the set temperature, you can accurately determine if your refrigerator compressor is working as it should.

How do you reset the compressor on a Frigidaire refrigerator?

To reset the compressor on a Frigidaire refrigerator, there is no separate or individual reset function specifically for the compressor. Instead, the whole refrigerator needs to be reset as a unit. To accomplish this, you can follow these steps:

1. Locate the power cord: Find the power cord at the back or bottom of the refrigerator.

2. Turn off the refrigerator: Unplug the power cord from the electrical outlet or switch off the dedicated circuit breaker that supplies power to the fridge. This will shut down all the components, including the compressor.

3. Wait for five minutes: Allow the refrigerator to remain powered off for approximately five minutes. This waiting period ensures that any residual energy is discharged from the unit, allowing for a fresh start upon restarting.

4. Power on the refrigerator: After the waiting period, plug the power cord back into the electrical outlet or switch on the circuit breaker to supply electricity to the refrigerator.

5. Give it time to start up: The compressor and all other components will begin the start-up process once power is restored. It may take a few minutes for the compressor to restart and cool down the interior again.

By following these steps, you will be resetting the entire refrigerator, including the compressor. It allows the compressor and other crucial parts of the fridge to reset and resume normal operation.

How do you run a diagnostic test on a Frigidaire refrigerator?

What is the purpose of entering the diagnostic mode on a Frigidaire refrigerator?
The purpose of entering the diagnostic mode on a Frigidaire refrigerator is to run a diagnostic test, which can help identify and troubleshoot any issues or problems with the refrigerator.

How do you enter the diagnostic mode on a Frigidaire refrigerator?
To enter the diagnostic mode on a Frigidaire refrigerator, you can press and hold the Freezer Temperature Up button and the Freezer Temperature Down button simultaneously. Then, release those buttons and press them again twice.

What should you do after pressing and holding the buttons?
After pressing and holding the buttons, you should release them and then press them again twice.

Which buttons do you need to press and hold simultaneously?
The buttons you need to press and hold simultaneously are the Freezer Temperature Up button and the Freezer Temperature Down button.

How do you run a diagnostic test on a Frigidaire refrigerator?
To run a diagnostic test on a Frigidaire refrigerator, you can press and hold two buttons simultaneously: the Freezer Temperature Up button and the Freezer Temperature Down button.

I apologize for any confusion. It seems that the provided passage, Your article, does not directly address the question at hand, which is “How do you run a diagnostic test on a Frigidaire refrigerator?” Instead, it appears to focus on troubleshooting common issues with Frigidaire dishwashers.

To provide a more thorough answer to your question, I will now explain how to run a diagnostic test on a Frigidaire refrigerator in a similar voice and tone as Your article.

Running a diagnostic test on a Frigidaire refrigerator can help identify any potential problems and provide valuable information for troubleshooting. To initiate this diagnostic mode, you need to follow a specific set of steps.

First, locate the Freezer Temperature Up button and the Freezer Temperature Down button on your Frigidaire refrigerator’s control panel. These buttons are typically found on the front display panel or inside the refrigerator.

Next, press and hold both the Freezer Temperature Up button and the Freezer Temperature Down button simultaneously. Keep holding them down for a few seconds until you see the control panel display change or hear a beep sound.

Once you notice the change in the display or hear the beep sound, release both buttons. Then, press and release the same buttons again twice in quick succession.

By following these steps, you will successfully enter the diagnostic mode on your Frigidaire refrigerator. In this mode, the refrigerator will run a series of tests to check various components and functions.

Please note that the specific tests and the way they are displayed may vary depending on the model of your Frigidaire refrigerator. It’s always a good idea to consult the user manual or reach out to Frigidaire customer support for model-specific instructions.

I hope this provides a more comprehensive explanation of how to run a diagnostic test on a Frigidaire refrigerator. Should you have any further questions or need additional assistance, please feel free to ask.

Is there a reset button on a Frigidaire refrigerator?

How can a Frigidaire refrigerator be reset?
A Frigidaire refrigerator can be reset through power cycling. To do this, you need to unplug the fridge from the wall socket and wait for 5 minutes before plugging it back in. This will reset the refrigerator, including the computer inside that controls its functions.

Is there a reset button on a Frigidaire refrigerator?
No, there is no dedicated reset button for a Frigidaire refrigerator.

“When it comes to resetting a Frigidaire dishwasher, you won’t find a dedicated reset button like some other appliances. However, fear not, as there is a straightforward solution. Frigidaire dishwashers do not come equipped with buttons specifically labeled ‘Reset’. Instead, you’ll find a convenient cancel button located on the far right side of the control panel. By pressing this button, you can effectively reset the dishwasher and clear any ongoing cycle or error. While it may not be labeled as a ‘Reset’ button, the cancel button serves the purpose of resetting the dishwasher to its default state, ready for a fresh start.”

Please note that although this passage includes the exact text of Your article, it also incorporates the thoroughness and explanatory tone of Their article to provide a more comprehensive answer to the question about resetting a Frigidaire dishwasher.

Conclusion

As good and popular a Frigidaire dishwasher are, they sometimes run into problems and fail to work accordingly.

With this Frigidaire dishwasher diagnostic mode, you can easily troubleshoot the most common problems with Frigidaire dishwashers without ever having to consult a professional technician.

Also Read:

Frigidaire Dishwasher Stuck on the Wash Cycle: Troubleshooting Guide