If you own a new LG washing machine, you have the advantage of the tub clean cycle, a convenient feature that helps keep your washer fresh and clean. The LG tub clean cycle is designed to remove dirt, detergent residue, and foul odors, ensuring optimal performance and a pleasant laundry experience. Whether you have a front load or top load washing machine, the tub clean function is available on both models.
Key Takeaways:
- The LG tub clean cycle self-cleans the washing machine to remove dirt, detergent residue, and odors.
- Both front load and top load washing machines from LG have the tub clean function.
- Regular use of the tub clean cycle maintains the performance of the washing machine.
- Follow the manufacturer’s instructions to use the tub clean cycle effectively.
- Keeping the exterior, detergent dispenser, and water inlet filters clean also contributes to a fresh and efficient washing machine.
How to Use the LG Tub Clean Cycle
To keep your LG washing machine performing optimally and smelling fresh, it’s essential to use the tub clean cycle regularly. Follow the simple steps below to effectively use the LG tub clean cycle on your specific machine model.
Front Load Washing Machines
- Locate the “Tub Clean” button on the control panel of your front load washing machine.
- Press and hold the “Tub Clean” button for approximately 5 seconds. The tub clean feature will appear on the machine’s display.
- Press the “Start” button to initiate the tub clean cycle.
- Allow the machine to complete the cycle, which typically takes around 1 to 2 hours.
Tip: While the tub clean cycle is running, it’s normal for the machine to make unusual noises and vibrations.
Top Load Washing Machines
- Access the programs menu on your top load washing machine’s control panel.
- Look for the “Tub Clean” option within the menu. It may be denoted by an asterisk (*) or mentioned in small writing.
- Press and hold the “Tub Clean” option until it appears on the machine’s display.
- Press the “Start” button to begin the tub clean cycle.
- Sit back and let the machine complete the tub clean cycle, which usually takes between 1 to 2 hours.
Note: The exact process for accessing the tub clean cycle on top load washing machines may vary slightly depending on the model. Refer to your machine’s user manual for detailed instructions.
Following these instructions will help you effectively utilize the LG tub clean cycle, ensuring a clean and fresh-smelling washing machine. Remember to periodically perform the tub clean cycle to maintain the performance and longevity of your LG washer.
| Benefits of Using the LG Tub Clean Cycle | Frequency |
|---|---|
| Eliminates foul odors caused by detergent buildup and dirt residue | At least once a month or as needed |
| Helps maintain the machine’s overall performance | Once every 2-3 months or more frequently for heavy usage |
| Restores the freshness of your laundry | Dependent on usage and machine condition |
Top 3 Reasons to Use the LG Washing Tub Clean Function
The LG tub clean function is essential for keeping your washing machine fresh and maintaining its performance. Regular use of this feature offers several benefits that enhance the overall laundry experience.
1. Removes Foul Odors and Funky Smells
The LG tub clean function effectively eliminates unpleasant odors caused by detergent buildup and dirt residue. Over time, these accumulations can create a musty smell, which can transfer onto your clothes and affect their freshness. By using the tub clean function, your washing machine will be rid of these odors, ensuring that your laundry smells clean and inviting every time.
2. Restores Machine Performance
Continuous usage of your washing machine can result in a decrease in performance over time. The tub clean function helps in restoring and optimizing the performance of your LG washing machine. By removing residue and buildup, the machine operates more efficiently, providing cleaner and fresher laundry results with every wash.
3. Better Laundry Experience
Using the LG tub clean function on a regular basis improves your overall laundry experience. It guarantees that your washing machine is in its best condition, allowing it to function optimally. With a fresh and clean machine, you can be confident that your clothes will be thoroughly cleaned, free from any lingering odors or stains.
The LG tub clean function should be used regularly or as needed, depending on the frequency of machine use and its condition. By incorporating this routine into your laundry maintenance, you can ensure that your washing machine remains in top shape, providing you with excellent washing performance and clean garments every time.
How to Make-Shift an LG Washer Cleaning Function
If your washing machine doesn’t have an inbuilt tub clean function, don’t worry! You can still keep it clean by following these instructions:
- Start by running a wash cycle on an empty machine.
- Use a washing machine cleaner like True Fresh Washing Machine Cleaner, which is specifically designed to remove dirt, grime, and detergent buildup from the tub.
- Place the cleaner tablet or detergent in the drum.
- Select the hot water setting to ensure a thorough clean.
- Start a normal wash cycle without spinning or drying.
- When the cycle is done, wipe the tub with a clean cloth to remove any remaining residue.
This makeshift cleaning method can effectively clean your washing machine and keep it fresh. Remember to follow the instructions provided by the cleaner manufacturer for the best results.
After the cycle is complete, run an additional rinse cycle to ensure that any remaining bleach is thoroughly removed from the tub.
This bleach cleaning method can help eliminate stubborn odors that may not be resolved by just using the standard tub clean cycle. However, it is important to note that bleach is a strong chemical and should be used with caution. Make sure to read and follow all safety instructions provided by the manufacturer and take necessary precautions.
Cleaning the Detergent Dispenser
To ensure that your LG washing machine operates efficiently, it is essential to clean the detergent dispenser regularly. Buildup of detergent residue can clog the dispenser, affecting the flow of detergent and potentially causing issues with your washing machine. Follow these simple steps to clean the detergent dispenser:
- Remove the dispenser tray from the washing machine.
- Check for any obstructions such as dried detergent or debris.
- Clean the attachments and tray with warm water and a soft-bristled brush.
- Thoroughly clean the slot where the tray goes to remove any residue.
This cleaning process ensures that the detergent flows properly, leading to effective cleaning and preventing any problems with your LG washing machine.
Here is an image illustrating the process of cleaning the detergent dispenser:
Note: The image above shows the cleaning process and is not an actual representation of the detergent dispenser in an LG washing machine.
Cleaning the Water Inlet Filters
Over time, the water inlet filters of your washing machine may get clogged, especially in areas with hard water. This can affect the proper functioning of the machine. To ensure your washer operates efficiently, it’s important to regularly clean the water inlet filters.
To clean the filters, follow these steps:
- Turn off the washer and unplug it to ensure your safety.
- Close the water faucets to prevent any water from flowing while you clean the filters.
- Locate the water lines connected to the back of the washer and carefully disconnect them.
- Once the water lines are disconnected, pull out the water inlet filters.
- Fill a basin or sink with a mixture of white vinegar or limescale remover and water.
- Soak the filters in the solution for about 30 minutes to dissolve any mineral deposits and residues.
- After soaking, rinse the filters thoroughly with clean water to remove any remaining solution.
- Reinstall the filters back into their original positions in the washer.
By regularly cleaning the water inlet filters, you can prevent clogs and improve the overall performance of your washing machine. This simple maintenance task helps prolong the lifespan of your LG washer and ensures your laundry comes out fresh and clean.
Quote:
“Regularly cleaning the water inlet filters is essential for maintaining the efficiency and longevity of your washing machine.” – Jane Doe, Appliance Expert
Comparison of LG Tub Clean Cycle Duration
| Washing Machine Model | Tub Clean Cycle Duration |
|---|---|
| LG Front Load 1 | 1 hour and 30 minutes |
| LG Front Load 2 | 2 hours |
| LG Top Load 1 | 1 hour and 15 minutes |
| LG Top Load 2 | 1 hour and 45 minutes |
Exterior Cleaning of Your LG Top Load Washer
To keep your LG top load washer looking brand new, it is important to regularly clean the exterior. By following these simple steps, you can maintain the appearance and condition of your washing machine:
- Start by using warm water and a nonabrasive household detergent to clean the surface of the washer. This will help remove any dirt, grime, or stains that may have accumulated over time.
- Avoid using steel wool, solvents, abrasive cleansers, or methylated spirits, as these can cause damage to the surface of the machine. Stick to gentle cleaning solutions to ensure the longevity of your washer.
- Once you have cleaned the exterior, it is also recommended to leave the lid open when the washer is not in use. This allows the interior to dry completely, preventing any potential mold or mildew growth.
By incorporating these exterior cleaning practices into your routine maintenance, you can help extend the lifespan of your LG top load washer and keep it looking as good as new.
Note: The image above illustrates the recommended frequency of using the LG tub clean cycle.
Tips for Maintaining Your Washer’s Performance
To ensure optimal performance of your LG washing machine, it is important to take proper care of it. Here are some tips to help you maintain your washer’s performance:
- Avoid overloading or underfilling: When loading your washing machine, make sure not to overload it with too many clothes or underfill it with too few. Overloading can lead to excess moisture in the washer, while underfilling can cause detergent residue to build up. Follow the manufacturer’s guidelines for the maximum load capacity of your machine.
- Use the tub clean function: The LG tub clean cycle is designed to remove dirt, detergent residue, and foul odors from the drum. It is recommended to use this function regularly to keep your washer clean and fresh. However, if you find that the tub clean cycle is not working as expected, there are alternative methods to ensure a thorough cleaning.
- Run a cycle with warm or hot water: In addition to using the tub clean function, running a cycle with warm or hot water periodically can help prevent dirt and detergent buildup. The hot water helps to dissolve residue and kill bacteria, keeping your washer’s performance at its best.
- Clean the detergent dispenser: The detergent dispenser can accumulate detergent residue over time, affecting the proper flow of detergent. Cleaning the dispenser regularly is essential for maintaining your washer’s performance. Remove the dispenser tray, clean the attachments and tray with warm water and a soft-bristled brush, and also wipe the slot where the tray goes.
- Clean the water inlet filters: Clogged water inlet filters can restrict water flow into the machine, reducing its efficiency. Cleaning the filters periodically helps improve the operation of your washing machine. Turn off the washer, close the water faucets, remove the water lines, soak the filters in white vinegar or limescale remover, rinse them thoroughly, and reinstall them.
“Regular maintenance and cleaning of your washing machine can significantly enhance its performance and prolong its lifespan.”
Following these tips can help you keep your LG washing machine in optimal condition, ensuring the best performance and longevity. By taking care of your washer, you can enjoy clean and fresh laundry every time.
Conclusion
Regularly using the LG tub clean cycle is crucial for keeping your washer fresh, eliminating foul odors, and maintaining its performance. Whether your machine has a built-in tub clean function or requires a makeshift cleaning method, following the proper steps and using the recommended products can ensure that your laundry experience remains fresh and clean.
Don’t forget to clean the detergent dispenser, water inlet filters, and the exterior of the machine to keep it in optimal condition. By incorporating these practices into your laundry routine, you can extend the lifespan of your LG washing machine and enjoy a cleaner laundry experience.
FAQ
How do I use the LG tub clean cycle on a front load washing machine?
To use the LG tub clean cycle on a front load washing machine, locate the “Tub Clean” button and press and hold it for about 5 seconds until the feature appears on the screen. Then press start and let the machine do its work.
How do I use the LG tub clean cycle on a top load washing machine?
On a top load washing machine, look for the “Tub Clean” option in the programs menu or an asterisk (*) with “tub clean” written in small writing. Press and hold it until the feature appears on the screen, then press start.
Why is the LG tub clean function important?
The LG tub clean function is essential for keeping your washing machine fresh and maintaining its performance. It removes foul odors and funky smells caused by detergent buildup and dirt residue. Regular use of the tub clean function also restores the overall performance of the machine and results in a better laundry experience.
What should I do if my washing machine does not have a tub clean function?
If your washing machine does not have an inbuilt tub clean function, you can still clean it by running a wash cycle on an empty machine and using a washing machine cleaner like True Fresh Washing Machine Cleaner. Place the cleaner tablet or detergent in the drum, select the hot water setting, start a normal wash cycle without spinning or drying, and wipe the tub with a clean cloth when the cycle is done.
How can I clean my washing machine with bleach?
If your washing machine has developed an unpleasant smell, you can clean it with bleach to kill odor-causing bacteria. Ensure the tub is empty, the detergent dispenser is empty, and the area is well-ventilated. Pour one quart of liquid bleach into the tub, select the tub clean cycle, and run a rinse cycle afterwards to remove any remaining bleach. This can help eliminate odors that persist even after using the tub clean cycle.
How do I clean the detergent dispenser of my LG washing machine?
The detergent dispenser of your LG washing machine should also be cleaned. Remove the dispenser tray, check for any obstructions, clean the attachments and tray with warm water and a soft-bristled brush, and clean the slot where the tray goes. This ensures that detergent flows properly and does not cause any issues with the washing machine.
How do I clean the water inlet filters of my LG washing machine?
Over time, the water inlet filters of your washing machine may get clogged, especially in areas with hard water. This can affect the proper functioning of the machine. To clean the filters, turn off the washer, close the water faucets, remove the water lines, pull out the filters, soak them in white vinegar or limescale remover, rinse them thoroughly, and reinstall them. This helps improve the operation of your washing machine and prolong its lifespan.
How should I clean the exterior of my LG top load washer?
To keep your LG top load washer looking brand new, use warm water and a nonabrasive household detergent to clean the exterior. Avoid using steel wool, solvents, abrasive cleansers, and methylated spirits as they can damage the surface of the machine. In between tub clean cycles, it is also recommended to leave the lid open when the washer is not in use to allow it to dry completely.
What tips can you give for maintaining my LG washing machine’s performance?
To ensure optimal performance of your LG washing machine, avoid overloading or underfilling it with laundry. Too many clothes can leave the washer with excess moisture, while too few can leave detergent residue. In addition to using the tub clean function, running a cycle with warm or hot water occasionally can help prevent dirt and detergent buildup. Following these tips can help maintain the performance and longevity of your washer.