If you own a Maytag front load washer, it’s essential to familiarize yourself with the error codes it may display. These error codes can be incredibly helpful in diagnosing and troubleshooting issues with your washer. In this guide, we will provide you with a comprehensive list of Maytag front load washer error codes, along with their solutions. By understanding these codes, you can often resolve problems without the need for professional assistance.
Key Takeaways:
- Maytag front load washers have error codes to help diagnose and troubleshoot issues.
- Refer to your owner’s manual for specific error codes for your model.
- If the provided solutions don’t work, contact Maytag for further assistance.
- Regular maintenance, such as using the right detergent and checking the drain hose, can prevent error codes.
- By following the error solutions, you can often fix the problem without professional help.
Control Lock Activated (LOC or LC Error)
If you see the LOC or LC error code on your Maytag front load washer, it means that the control lock has been activated. This is a feature designed to prevent accidental changes to the settings during a cycle. However, it can be frustrating if you don’t know how to unlock it.
To unlock the controls, simply locate the Control Lock button on the control panel. On newer models, this button is usually labeled with a padlock icon. Press and hold the button for a few seconds until the LOC or LC error code disappears. The controls should now be unlocked, and you can resume using your washer as usual.
Note that on older models, the location of the Control Lock button may vary. Consult your owner’s manual to find the specific button that activates the control lock on your washer. If necessary, press and hold the button for a few seconds to unlock the controls.
Here’s a step-by-step guide on how to unlock the controls:
- Locate the Control Lock button on your Maytag front load washer.
- Press and hold the button for a few seconds until the LOC or LC error code disappears.
- The control lock should now be deactivated, and you can use your washer normally.
Avoiding Control Lock Activations:
To prevent accidental control lock activations in the future, make sure to be mindful of the control panel when using your Maytag front load washer. Avoid leaning or resting against the control panel, as this can inadvertently activate the control lock. Additionally, familiarize yourself with the location of the Control Lock button so that you can easily deactivate it if necessary.
If the Control Lock Error Persists:
If you have followed the above steps to unlock the controls and the LOC or LC error code continues to appear, there may be an underlying issue with the control panel or wiring. In such cases, it is recommended to contact Maytag customer support or schedule a service appointment online for further assistance and resolution.
| Error Code | Error Message | Solution |
|---|---|---|
| LOC or LC | Control Lock Activated | Press and hold the Control Lock button to unlock the controls. |
Detergent Cartridge Not Detected (dET Error)
The dET error code indicates that the detergent cartridge is not detected in the dispenser. This error is applicable only to select models of Maytag front load washers that feature a detergent cartridge system. If you are using single-load doses of detergent, you can safely ignore this message.
If you encounter the dET error code, follow these steps to resolve the issue:
- Ensure that the detergent cartridge is inserted correctly into the dispenser. Refer to your owner’s manual for instructions on how to properly insert the cartridge.
- Check that the dispenser drawer is fully closed. The dET error code may appear if the drawer is not shut completely.
If you have followed these steps and the error code persists, it is recommended to contact Maytag for further assistance or schedule a service online.
“The dET error code can be easily resolved by ensuring that the detergent cartridge is properly inserted and that the dispenser drawer is fully closed.”
Cycle Paused or Canceled (Int Error)
If your Maytag front load washer displays the Int error code, it means that the wash cycle was either paused or canceled. It’s important to note that the washer may continue to spin and drain for a short period before showing this error code.
To resolve the Int error code, follow these steps:
- Press the “Pause” or “Cancel” button twice to clear the code.
- Press the “Power” button once to completely remove the error code from the display.
If the error code persists, try the following solution:
Unplug the washer or disconnect the power for one minute. This action will reset the washer’s control system and potentially resolve the issue.
| Error Code | Solution |
|---|---|
| Int | 1. Press “Pause” or “Cancel” twice. 2. Press “Power” once. |
| Int (persistent) | Unplug the washer or disconnect the power for one minute. |
Items Detected in Clean Washer Cycle (rL or F34 Error)
If your Maytag front load washer displays the rL or F34 error code during the Clean Washer cycle, it means that items have been detected in the washer drum. To resolve this error, follow the simple steps below:
- Remove the items from the drum to ensure there are no obstructions.
- Close the washer door securely.
- Restart the Clean Washer cycle.
By removing any items found in the drum and restarting the Clean Washer cycle, you can clear the rL or F34 error code and continue with your laundry tasks.
Please note that the Clean Washer cycle is designed to maintain the cleanliness and freshness of your washer by removing dirt and detergent residue. It is important to keep the drum empty during this cycle to ensure optimal performance and prevent error codes.
Excessive Suds (Sud or Sd Error)
The Sud or Sd error code indicates that there are too many suds in the washing machine. This can occur when using the wrong type of detergent or adding too much detergent to the load. Excessive suds can impact the washer’s performance and may prevent proper rinsing of the clothes.
To resolve the Sud or Sd error:
- Pause the cycle and allow the washer to automatically extend the rinse time to remove the excess suds.
- Make sure you are using HE or High Efficiency detergent. These detergents are designed for front load washers and produce less suds.
- Avoid using “no splash” or “easy pour” liquid chlorine bleach, as they can also cause excessive suds.
- Check the drain hose for any restrictions or clogs. A clogged drain hose can lead to poor drainage, which may contribute to excessive suds.
By following these steps, you should be able to resolve the Sud or Sd error and prevent it from recurring. Remember to always use the appropriate detergent and avoid overloading the washer to ensure optimal performance.
“Excessive suds can impact the washer’s performance and may prevent proper rinsing of the clothes.”
Door Not Locking Properly (F5 E2 Error)
The F5 E2 error code indicates that the door is not locking properly. When this error occurs, it’s important to check for any items that may be blocking the door. Additionally, make sure that the door is closing completely and securely, as a partially closed door can trigger the error code.
If you’re dealing with this error, try pressing the pause or cancel button twice, followed by pressing the power button once. This can help clear the error code and potentially resolve the issue. If the error persists, it’s recommended to contact Maytag for further assistance or consult the owner’s manual for troubleshooting tips specific to your model.
Motor Speed Sensing Error (F7 E1 Error)
The F7 E1 error code on your Maytag front load washer indicates a motor speed sensing error. This error can occur due to various reasons, but it can usually be resolved with a few simple steps.
Causes of the F7 E1 Error
The F7 E1 error may be triggered by the following factors:
- Shipping bolts left in place
- Overloading the washer
Let’s take a closer look at each of these causes and how to address them:
1. Shipping Bolts
Before using your Maytag front load washer, it’s crucial to ensure that all shipping bolts have been removed. These bolts help secure the drum during transportation but must be removed before operating the appliance. If the shipping bolts are still in place, it can lead to a motor speed sensing error. Refer to your owner’s manual for instructions on how to remove the shipping bolts if necessary.
2. Overloading the Washer
Overloading the washer with too many clothes or exceeding the recommended weight capacity can also trigger the F7 E1 error. It’s important to follow the manufacturer’s guidelines and avoid overstuffing the drum. Distribute the load evenly to prevent strain on the motor. Refer to your owner’s manual for the recommended weight capacity of your specific model.
Solution:
To clear the F7 E1 error code on your Maytag front load washer, follow these steps:
- Press the pause or cancel button twice to stop any ongoing cycle.
- Press the power button once to turn off the washer.
- Wait for a few minutes, then press the power button again to turn on the washer.
By following these steps, you should be able to clear the F7 E1 error and resume normal operation of your Maytag front load washer. If the error persists or you are unsure about any of the steps, it’s advisable to consult the owner’s manual or contact Maytag customer support for further assistance.
Remember, regular maintenance and following the manufacturer’s guidelines can help prevent error codes and ensure optimal performance of your Maytag front load washer.
| Troubleshooting Steps | |
|---|---|
| Step 1 | Press the pause or cancel button twice to stop the cycle. |
| Step 2 | Press the power button once to turn off the washer. |
| Step 3 | Wait for a few minutes, then press the power button again to turn on the washer. |
Low Water Flow (F8 E1 or LO FL Error)
If you’re encountering the F8 E1 or LO FL error code on your Maytag front load washer, it means that there’s a low flow of water to the machine. Don’t worry, though – there are a few steps you can take to resolve this issue.
- First, check that the water supply to your washer is turned on. Sometimes, the problem can be as simple as a closed valve.
- Next, inspect the inlet hoses connected to your washer. Make sure they aren’t kinked or twisted, as this can restrict water flow.
- If the hoses appear to be fine, check for any clogs or obstructions. Debris or sediment buildup can impede water flow and trigger the error code.
If none of these steps resolve the issue, you can try clearing the error code by pressing the pause or cancel button twice, followed by the power button once. This can sometimes reset the system and eliminate the error.
However, if the error persists after attempting these solutions, it’s recommended to contact Maytag or schedule a service appointment online. Their professional technicians can diagnose and address any underlying issues to ensure your washer operates smoothly.
Dispenser System Issue (F8 E2 Error)
The F8 E2 error code is specific to Maytag front load washers and indicates a problem with the dispenser system. This error may affect selected models.
“The dispenser system plays a crucial role in delivering detergent and other additives to the wash cycle. When this system encounters an issue, it can disrupt the washing process and display the F8 E2 error code.”
To resolve the F8 E2 error code, follow these steps:
- First, check the detergent drawer or cartridge for any clogs caused by detergent buildup. Cleaning the dispenser will help remove any blockages that may hinder the proper functioning of the system.
- If the dispenser drawer or cartridge is free of clogs, make sure it is inserted correctly and securely. An improperly placed dispenser can also trigger the error code.
- Ensure the dispenser drawer is shut completely before starting the wash cycle. If the drawer is partially open, it can result in dispenser system issues and the associated error code.
By performing these steps, you can address the dispenser system issue and resolve the F8 E2 error code on your Maytag front load washer.
| Error Code | Issue | Solution |
|---|---|---|
| F8 E2 | Dispenser system issue | 1. Check for detergent buildup in the dispenser and clean 2. Ensure correct placement and secure insertion of the dispenser drawer or cartridge 3. Shut the dispenser drawer completely |
Following these steps will help you resolve the F8 E2 error code and ensure the proper functioning of the dispenser system in your Maytag front load washer.
Excessive Drain Time (F9 E1 Error)
If your Maytag front load washer displays the F9 E1 error code, it means that the drain times are longer than expected. This can be a result of various issues with the drain hose and detergent usage. Follow the steps below to resolve the error and get your washer back up and running smoothly.
Check the Drain Hose
First, inspect the drain hose for any kinks or clogs. A kinked or obstructed hose can hinder the proper drainage of water from the machine, resulting in excessive drain time. Straighten out any kinks and remove any blockages to ensure unrestricted water flow.
Use HE Detergent
Using the correct detergent is crucial for efficient operation and to avoid error codes. Ensure that you are using high-efficiency (HE) detergent specifically designed for front load washers. Using regular detergent can create excessive suds, leading to longer drain times. Switch to HE detergent to prevent this issue.
Proper Drain Hose Installation
Check the installation of the drain hose to ensure it is done correctly. Improper installation can cause water to back up into the washer, prolonging the drain cycle. Refer to the user manual for proper installation guidelines and make any necessary adjustments.
| Error Code | Possible Causes | Solution |
|---|---|---|
| F9 E1 | Long drain times |
|
By following these steps, you can effectively troubleshoot the F9 E1 error code on your Maytag front load washer. Resolving this issue will help restore proper draining and ensure the optimal performance of your washer.
Conclusion
When it comes to Maytag front load washer error codes, troubleshooting and maintaining your washer are key. By utilizing the provided error solutions, you can often resolve common issues without the need for professional assistance. Regular maintenance tips, such as using the appropriate detergent and checking the drain hose, can help prevent error codes from occurring and ensure that your washer runs efficiently.
Diagnosing and troubleshooting error codes is made easier with the information provided in this guide. By referring to your owner’s manual for specific error codes, you can quickly determine the cause of the problem and take appropriate action. Remember to follow safety guidelines and consult Maytag or schedule a service online if the solutions provided don’t resolve the issue.
Don’t let Maytag front load washer error codes disrupt your laundry routine. With the troubleshoot and maintenance tips outlined in this guide, you can effectively address common problems and keep your washer running smoothly. Remember to always prioritize safety and refer to your owner’s manual for model-specific details. Happy washing!
FAQ
What does the LOC or LC error code mean?
The LOC or LC error code indicates that the control lock has been activated. To unlock the controls, touch the Control Lock button. On older models, refer to your owner’s manual to determine which button activates the control lock. Press and hold the button if necessary.
What should I do if I see the dET error code?
The dET error code appears when the detergent cartridge is not detected in the dispenser. This is applicable only to select models with a detergent cartridge. If you are using single-load doses of detergent, ignore this message. Ensure that the dispenser cartridge is inserted correctly and that the dispenser drawer is shut completely.
Why am I seeing the Int error code?
The Int error code indicates that the wash cycle was paused or canceled. The washer may take some time to stop spinning and drain before displaying this error code. To remove the code, press the pause or cancel button twice and the power button once. If the code persists, unplug the washer or disconnect the power for one minute.
What does the rL or F34 error code indicate?
The rL or F34 error code appears when items are detected in the washer during the Clean Washer cycle. Remove the items from the drum and restart the Clean Washer cycle to resolve the error.
Why am I getting the Sud or Sd error code?
The Sud or Sd error code indicates that there are too many suds in the washing machine. The washer will automatically extend the rinse time to remove the excess suds. Make sure you are using HE or High Efficiency detergent and avoid using “no splash” or “easy pour” liquid chlorine bleach, as they can also cause excessive suds. Check the drain hose for any restrictions or clogs as well.
What should I do if I see the F5 E2 error code?
The F5 E2 error code indicates that the door is not locking properly. Check for any items blocking the door and ensure that it is closing completely. Press the pause or cancel button twice and the power button once to clear the error code.
Why am I getting the F7 E1 error code?
The F7 E1 error code indicates a motor speed sensing error. Check that all shipping bolts have been removed and that the washer is not overloaded. Press the pause or cancel button twice and the power button once to clear the error code.
What does the F8 E1 or LO FL error code mean?
The F8 E1 or LO FL error code indicates a low flow of water to the washer. Check that the water supply is turned on and that the inlet hoses are not kinked or clogged. Press the pause or cancel button twice and the power button once to clear the error code.
Why am I getting the F8 E2 error code?
The F8 E2 error code indicates a problem with the dispenser system, applicable to select models. Verify that the detergent drawer or cartridge is not clogged with detergent. Clean the dispenser to resolve the error.
What should I do if I see the F9 E1 error code?
The F9 E1 error code indicates that the drain times are longer than expected. Check that the drain hose is not kinked or clogged and ensure that you are using HE detergent. Make sure the drain hose is installed correctly following the provided guidelines.