Troubleshooting Guide: Kenmore Washer Model 110 Won’t Spin

Are you having trouble getting your Kenmore Washer Model 110 to spin? It’s a frustrating experience, but don’t worry. We’ve got you covered with this comprehensive troubleshooting guide. Follow these steps to get your washer back in working order.

Key Takeaways:

• Kenmore Washer Model 110 not spinning can be caused by various reasons.
• The power supply, lid switch, drive belt, motor coupling, clutch assembly, control board, motor, suspension springs, drain pump, and spin basket can all contribute to the spin problem.
• Inspect each component for any visible damage or wear and replace them as necessary.
• Cleaning the spin basket may help restore normal spinning operation.
• If the problem persists, seek professional assistance or contact Kenmore support for further guidance.

Troubleshooting Guide: Kenmore Washer Model 110 Won’t Spin

If your Kenmore Washer Model 110 won’t spin, don’t worry. In this troubleshooting guide, we’ll walk you through the steps to help you identify and resolve the issue.

Check the Power Supply

The first thing you should do when troubleshooting a washing machine not spinning is to check the power supply. Ensure that your Kenmore Washer Model 110 is properly plugged in and that the circuit breaker hasn’t tripped.

If the power supply is not the issue, move on to the next step.

Examine the Lid Switch

A faulty lid switch can prevent your Kenmore Washer Model 110 from entering the spin cycle. Open the lid of the washer and locate the lid switch. Check for any signs of damage or wear. If necessary, replace the lid switch to fix the spin issue.

Assess the Drive Belt

The drive belt is responsible for transferring power from the motor to the drum. If it is worn or broken, it may prevent your Kenmore Washer Model 110 from spinning. Inspect the drive belt for any signs of damage. If needed, replace the drive belt.

Inspect the Motor Coupling

The motor coupling connects the motor to the transmission. If it is broken or worn out, the washer won’t spin. Carefully examine the motor coupling for any signs of damage. Replace it if necessary to restore spinning functionality.

Check the Clutch Assembly

The clutch assembly engages the transmission to enable the spin cycle. If it is defective, the washer may agitate but won’t spin. Inspect the clutch assembly for any visible issues. If required, replace the clutch assembly.

Verify the Control Board

The control board regulates the various functions of your washer, including the spin cycle. If it is malfunctioning, it may prevent the washer from spinning. Check the control board for any visible signs of damage. Consider replacing it to resolve the spin issue.

Examine the Motor

A faulty motor can be the cause of the spin issue. Inspect the motor for any signs of damage or overheating. If needed, replace the motor to restore proper spinning functionality.

Test the Suspension Springs

The suspension springs support the tub assembly and allow for smooth spinning. If they are broken or worn out, the washer may not spin properly. Check the suspension springs for any signs of damage. Replace them as necessary.

Check the Drain Pump

A clogged or damaged drain pump can prevent the washer from entering the spin cycle. Inspect the drain pump for any blockages or visible damage. Clean or replace the drain pump to resolve the issue.

Clean the Spin Basket

Over time, dirt and debris can accumulate in the spin basket, obstructing the spinning function. Clean the spin basket by removing any visible debris or deposits. This may help restore normal spinning operation.

By following these troubleshooting steps, you can resolve the issue of your Kenmore Washer Model 110 not spinning. In case the problem persists, it’s best to seek professional assistance or contact Kenmore support for further guidance.

Examine the Lid Switch.

If your Kenmore Washer Model 110 won’t spin, the lid switch may be the culprit. This switch is usually located near the door frame of the washer and is responsible for detecting whether the lid is closed or not. If the lid switch is damaged or worn, it may not function properly, causing the washer to not go into the spin cycle.

To check if the lid switch is the problem, you can perform a simple test. First, open the lid and locate the switch. You can use a multimeter to check if it is functioning correctly. Set the multimeter to the ohm setting and touch the leads to the switch’s terminals. With the lid closed, the reading should be zero ohms. With the lid open, the reading should be infinite ohms. If the switch fails this test, it needs to be replaced.

You can find a replacement lid switch for your Kenmore Washer Model 110 at your local appliance parts store or online. Install the new switch following the manufacturer’s instructions and test the washer to see if it is now spinning correctly.

Assess the Drive Belt

If your Kenmore Washer Model 110 won’t spin, a worn or broken drive belt could be the culprit. The drive belt transfers power from the motor to the drum, making it essential for proper washing machine function.

To assess the drive belt, follow these steps:

1. Unplug your washing machine to ensure your safety.
2. Locate the drive belt, which is typically found at the bottom of the machine. Consult the user manual if needed.
3. Visually inspect the drive belt for any signs of wear, such as cracks or fraying. If you notice any damage, it’s time to replace the drive belt.
4. If the drive belt appears to be in good condition, check that it is properly aligned on the pulleys. A misaligned belt can also cause the washer to malfunction.

When replacing the drive belt, be sure to consult the user manual or seek professional assistance to ensure proper installation. A correctly installed drive belt will help restore your Kenmore Washer Model 110’s ability to spin, fixing the spin problem.

Assess the Motor Coupling

The motor coupling is a small, yet essential part connecting the motor to the transmission in your Kenmore Washer Model 110. If it is faulty due to wear and tear, your washer may not spin. To ensure that the motor coupling is the root cause of the problem, examine it closely.

First, locate the motor coupling beneath the washer drum. Look for any visible signs of damage, such as cracks or breakages. If the coupling appears worn out and damaged, it must be replaced to restore the spinning functionality of your washer.

To replace the motor coupling, you will require a few tools such as a socket wrench, a putty knife, and a new coupling. Don’t forget to unplug your washer beforehand.

1. Use the putty knife to release the metal clips securing the washing machine’s cabinet to the back panel
2. Pull the cabinet forward to access the motor and pump assembly
3. Disconnect the motor from the pump by removing the clips or the screws
4. Remove the broken or worn-out coupling by prying it off with a screwdriver
5. Install the new coupling on the motor shaft and transmission input shaft, ensuring that it fits snugly
6. Reconnect the motor and pump assembly
7. Put the cabinet back into place and secure it with the metal clips

If replacing the motor coupling doesn’t resolve the problem of your Kenmore Washer Model 110 not spinning, move on to the next troubleshooting step.

Check the Clutch Assembly

If your Kenmore Washer Model 110 is not spinning but still agitates, the issue may lie in the clutch assembly. The clutch assembly engages the transmission to enable the spin cycle. If it is defective, it may prevent the washer from spinning.

To check the clutch assembly, follow these steps:

1. Unplug the washer from the power supply.
2. Locate the clutch assembly, which is located underneath the agitator.
3. Inspect the clutch assembly for any visible issues, such as cracks, breaks, or excessive wear and tear.
4. If you notice any damage, it’s time to replace the clutch assembly.

You can purchase a new clutch assembly from a Kenmore retailer or online. Make sure to have the model number of your washer on hand, as well as the part number of the clutch assembly you need.

Pro Tip: If you’re not comfortable replacing the clutch assembly yourself, consider hiring a professional technician to do it for you. This will ensure that the replacement is done correctly and safely.

Verify the Control Board

If you have followed the previous troubleshooting steps and your Kenmore Washer Model 110 is still not spinning, it may be time to examine the control board.

The control board regulates the various functions of your washer, including the spin cycle. If it is malfunctioning, it may prevent the washer from spinning. Check the control board for any visible signs of damage, such as burn marks or loose connections. If you notice any issues, consider replacing it to resolve the spin issue.

A control board replacement can be a bit tricky, so it’s important to consult your Kenmore washer’s manual or seek professional assistance. You can also contact Kenmore support for further guidance with your specific model.

Remember to always disconnect your washer from the power supply before attempting any repairs or replacements.

Troubleshooting Kenmore Washer Spin Issue: Recap

• Check the power supply
• Examine the lid switch
• Assess the drive belt
• Inspect the motor coupling
• Check the clutch assembly
• Verify the control board
• Examine the motor
• Test the suspension springs
• Check the drain pump
• Clean the spin basket

By following this comprehensive troubleshooting guide, you should be able to resolve the issue of your Kenmore Washer Model 110 not spinning. Don’t hesitate to seek professional assistance if needed, or reach out to Kenmore support for further guidance.

Examine the Motor

The motor is the powerhouse of your Kenmore Washer Model 110, responsible for driving the drum and enabling the spin cycle. If the motor is not functioning correctly, your washer may not spin. To troubleshoot this issue:

1. Unplug your Kenmore Washer Model 110 and turn off the water supply.
2. Move the washer away from the wall to access the back panel.
3. Remove the back panel by unscrewing the screws that hold it in place.
4. Locate the motor and check for any visible signs of damage or overheating. A damaged or burned-out motor may need to be replaced.
5. If the motor appears to be in good condition, use a multimeter to test for continuity. Follow the manufacturer’s instructions for testing the motor.
6. If the multimeter indicates that there is no continuity, the motor may need to be replaced.

Replacing the motor is a more complicated process than some of the other troubleshooting steps on this list. If you are not comfortable with replacing the motor yourself, seek professional assistance.

Remember to always unplug your Kenmore Washer Model 110 and turn off the water supply before attempting any repairs or maintenance.

Test the Suspension Springs

If your Kenmore Washer Model 110 won’t spin, it may be due to broken or worn-out suspension springs. These springs support the tub assembly and ensure smooth spinning of the washer. Here’s how to test them:

1. Unplug the washer from the power source.
2. Locate the suspension springs, which are typically near the top of the tub assembly.
3. Inspect each spring for visible signs of damage or stretching.
4. If any spring appears damaged, it will need to be replaced.

If all the springs appear to be intact, you can test them further by placing a level on top of the washer and checking if it is balanced. If the washer is unbalanced, it may be a sign that the suspension springs are worn out and need to be replaced.

To fix Kenmore washer spin problem caused by worn-out suspension springs, replace them with new ones. Refer to your washer’s user manual for specific instructions on how to replace the suspension springs.

Check the Drain Pump.

If your Kenmore Washer Model 110 won’t spin, the drain pump could be the culprit. A clogged or damaged drain pump can prevent the washer from entering the spin cycle. Follow these steps to check and clean or replace the drain pump:

1. Unplug your washer before starting any maintenance.
2. Locate the drain pump, which is typically located at the bottom of the washer. Consult your washer’s manual if necessary.
3. Check the pump for any visible blockages or damage, such as debris or cracks in the pump housing. If there is damage, the pump may need to be replaced.
4. If there is a blockage, carefully remove any debris from the pump. Wear gloves to protect your hands from the sharp edges of the pump.
5. Test the pump by running a drain and spin cycle. If the pump is still not working properly, it may need to be replaced.

Remember to plug your washer back in after completing any maintenance. Following these steps should resolve the drain pump issue and get your Kenmore Washer Model 110 spinning again.

Clean the Spin Basket

One common reason why the Kenmore Washer Model 110 won’t spin is due to a dirty spin basket. Dirt, lint, and other debris can accumulate over time and obstruct the spinning function. Cleaning the spin basket is a relatively straightforward process that can be done at home.

To clean the spin basket of your Kenmore Washer Model 110, follow these steps:

1. Turn off the power and unplug the washer from the electrical outlet.
2. Open the washer lid and remove any clothes or other items inside.
3. Locate the spin basket, which is the large drum in the center of the washer.
4. Inspect the spin basket for any visible debris or deposits.
5. Use a damp cloth or sponge to wipe away any dirt, lint, or other debris from the spin basket.
6. Rinse the spin basket thoroughly with warm water.
7. Use a towel to dry the spin basket completely.
8. Close the washer lid and plug the washer back in.
9. Run the washer through a spin cycle to ensure that it is now spinning properly.

Regularly cleaning the spin basket of your Kenmore Washer Model 110 can help prevent spinning issues in the future. If the problem persists, it may indicate a more significant problem that requires professional assistance.

Conclusion

If you’re dealing with a Kenmore Washer Model 110 that won’t spin, don’t worry! With this troubleshooting guide, you can easily diagnose and fix the issue. Start by checking the power supply and examining the lid switch. Then, assess the drive belt, inspect the motor coupling, check the clutch assembly, verify the control board, examine the motor, test the suspension springs, check the drain pump, and clean the spin basket.

By following these steps, you can save money on costly repairs and possibly even avoid a service call. Remember, if the problem persists, it may be necessary to seek professional assistance or contact Kenmore support for further guidance.

Thank you for reading our guide on troubleshooting your Kenmore Washer Model 110 spin issue. We hope you found it helpful! With our tips, you should be able to fix any spin problem and get your washer back in working order.