Are you experiencing error codes on your Whirlpool washer? Don’t worry! In this article, we will provide you with quick fixes and troubleshooting tips to help you diagnose and resolve the most common Whirlpool washer error codes. Whether you have a front load or top load washer, we’ve got you covered.
Key Takeaways:
- Whirlpool washer error codes can be easily diagnosed and fixed with the right troubleshooting steps.
- If our solutions don’t work, it’s recommended to contact customer service or schedule a service online.
- Always refer to the owner’s manual for specific error code meanings and instructions.
- Some common Whirlpool error codes include Control Lock (LOC or LC), dET (detergent cartridge not detected), Int (cycle paused or canceled), and Sud or Sd (excessive suds).
- Troubleshooting steps may vary depending on the error code, so make sure to follow the appropriate solutions for your specific issue.
Common Whirlpool Washer Error Codes
Whirlpool washers are designed to be efficient and reliable, but occasionally, you may encounter error codes that indicate an issue with your machine. Understanding these error codes can help you troubleshoot and fix the problem quickly. Here are some common Whirlpool washer error codes and their meanings:
| Error Code | Meaning |
|---|---|
| LOC or LC | Control Lock activated |
| dET | Detergent cartridge not detected |
| Int | Cycle paused or canceled |
| rL or F34 | Items detected in washer during Clean Washer cycle |
| Sud or Sd | Excessive suds in the washing machine |
| F5 E2 | Door not locking properly |
| F7 E1 | Motor speed sensing error |
| F8 E1 or LO FL | Low flow of water |
| F8 E2 | Problem with the Dispenser System |
| F9 E1 | Longer than expected drain times |
When you see any of these error codes on your Whirlpool washer, it’s important to take action to resolve the issue and prevent further damage to your machine. In the following section, we will provide troubleshooting steps to help you fix these error codes and get your washer back to working condition.
Troubleshooting Whirlpool Washer Error Codes
To troubleshoot Whirlpool washer error codes, follow these steps:
- Control Lock error (LOC or LC): touch the Control Lock button or refer to the owner’s manual.
- dET error (detergent cartridge not detected): ensure the cartridge is inserted correctly.
- Int error (cycle paused or canceled): press pause or cancel twice and the power button once.
- rL or F34 error (items detected in the washer during Clean Washer cycle): remove the items and restart the cycle.
- Sud or Sd error (excessive suds): use HE detergent and check for restricted drain hose or standpipe.
- Other error codes: unplug the washer, reconnect after one minute, and reselect the cycle.
Example:
Let’s say you encounter the Sud error code on your Whirlpool washer. This indicates excessive suds in the machine. To resolve this issue, follow these steps:
- Make sure you are using high-efficiency (HE) detergent designed for your washer.
- Check the drain hose for any clogs or kinks that may be restricting the flow of water.
- Ensure the washer is not overloaded with clothes, as this can cause excessive sudsing.
- Run a rinse cycle to remove the excess suds. You may need to repeat this process multiple times.
Note: If the problem persists or you encounter a different error code, consult the owner’s manual or contact customer service for further assistance.
Whirlpool Washer Error Codes and Troubleshooting Guide
| Error Code | Description | Troubleshooting Steps |
|---|---|---|
| LOC or LC | Control Lock activated | Touch the Control Lock button or refer to the owner’s manual |
| dET | Detergent cartridge not detected | Ensure the cartridge is inserted correctly |
| Int | Cycle paused or canceled | Press pause or cancel twice and the power button once |
| rL or F34 | Items detected in washer during Clean Washer cycle | Remove the items and restart the cycle |
| Sud or Sd | Excessive suds in the washing machine | Use HE detergent and check for restricted drain hose or standpipe |
| Other error codes | – | Unplug the washer, reconnect after one minute, and reselect the cycle |
Troubleshooting Whirlpool Top Load Washer Error Codes
If you own a Whirlpool top load washer and encounter error codes, don’t worry. Many common issues can be resolved with some troubleshooting steps. Here are some of the most common Whirlpool top load washer error codes:
drn: This error code indicates that your washer is not draining properly. To troubleshoot this issue, check the drain hose for any obstructions or kinks and ensure it is properly connected.
F# E# or F##: These system error codes indicate a malfunction in the washer’s internal systems. To troubleshoot, try resetting the machine by unplugging it for a few minutes and then plugging it back in. If the error persists, it may require professional service.
HC: This error code suggests that the hot and cold inlet hoses are installed incorrectly. Verify that the hoses are connected to the correct valves on the washer and the water supply.
LdL: If you see this error code, it means the lid is not locking properly. Inspect the lid area for any obstructions or damage that may prevent it from locking securely.
LdU: This error code indicates that the lid cannot unlock. Ensure that the washer is not running any cycles and try gently opening and closing the lid to release the lock.
LF, Lo FL, F8 E1: These error codes typically occur when the washer is filling too slowly. Check the water supply to the washer and ensure that the inlet valves are fully open. Reduce the load size if necessary, as an overloaded washer may also cause these error codes.
OL: This error code appears when the washer detects a load that is too large. Remove some items from the washer and redistribute the load to achieve better balance.
By following these troubleshooting steps, you can resolve many common Whirlpool top load washer error codes. However, if the problem persists or if you are unsure about the cause of the error, it is recommended to contact Whirlpool customer service or a qualified technician for further assistance.
Troubleshooting Steps for Whirlpool Top Load Washer Error Codes:
- Check the drain hose for obstructions and proper connection.
- Reset the machine by unplugging and plugging it back in.
- Verify the correct installation of the hot and cold inlet hoses.
- Inspect the lid area for any obstructions preventing it from locking or unlocking.
- Reduce the load size if the washer is filling too slowly.
- Ensure the washer load is not too large and properly balanced.
Troubleshooting Whirlpool Front Load Washer Error Codes
If you own a Whirlpool front load washer, you may encounter certain error codes that require troubleshooting. Understanding these common error codes and their solutions can help you resolve issues quickly and efficiently. Some of the most frequently encountered Whirlpool front load washer error codes include:
- F8 E1 or LF or LO FL (low flow of water)
- LdL or F5 E2 (lid fails to lock)
- LdU (lid fails to unlock)
- Ofb (washer load is unbalanced)
To troubleshoot these error codes effectively, consider the following steps:
- Check the water supply: Ensure that the water supply to the washer is not restricted and that the water valves are fully open.
- Inspect the lid area: Check if the lid is closing properly and that there are no obstructions preventing it from locking or unlocking.
- Redistribute the load: If the error code indicates an unbalanced load, redistribute the clothes evenly in the drum to ensure proper balance during the wash cycle.
- Ensure proper balance: If the washer load is unbalanced, adjust the items to evenly distribute the weight to prevent excessive vibrations and error codes.
By following these troubleshooting steps, you can often resolve the common error codes that occur with Whirlpool front load washers. However, if the problem persists or you’re unable to identify the cause of the error, it’s advisable to contact a professional technician or Whirlpool customer service for further assistance.
Frequently Asked Questions
Q: How do I reset my Whirlpool front load washer?
A: To reset your Whirlpool front load washer, you can unplug the machine from the power source for one minute, then plug it back in. This can help clear any temporary glitches or errors in the system.
Q: Why is my Whirlpool front load washer not filling with water?
A: If your Whirlpool front load washer is not filling with water or shows error codes related to low water flow, check the water supply to the machine. Ensure that the water valves are fully open and there are no obstructions in the hoses or water inlet filters. If the problem persists, it may require further inspection by a professional technician.
Quick Fixes for Whirlpool Washing Machine Error Codes
Before calling for service, try these quick fixes for common Whirlpool washing machine error codes:
- Rebalance the laundry load: If you have a top-loading machine, an unbalanced load can trigger error codes. Try redistributing the clothes evenly and ensure they are not clumped to one side.
- Reset the machine: Sometimes, a simple reset can resolve error codes. Unplug the machine from the power source, wait for a few minutes, and then plug it back in. Restart the machine and see if the error code disappears.
- Check the drain hose: A bent or kinked drain hose can prevent proper drainage and trigger error codes. Inspect the drain hose for any obstructions or bends and straighten it out if necessary.
These quick fixes may help you resolve common Whirlpool washing machine error codes without the need for professional assistance. However, if the error code persists or if you require further guidance, it is recommended to contact Whirlpool customer service or schedule a service appointment online.
Causes for Whirlpool Washing Machine Error Codes
Whirlpool washer error codes can be caused by various issues that affect the performance of the machine. Identifying the root cause of these errors is crucial in effectively troubleshooting and resolving them. Here are some common causes for whirlpool washer error codes:
Unbalanced Load
An unbalanced load in the washer drum can trigger error codes. When clothes are unevenly distributed, it can create excessive vibrations during the spin cycle, leading to errors such as Sud or Sd. Ensure that you distribute the load evenly to prevent this issue.
Bent Drain Hose
A bent or kinked drain hose can restrict the flow of water out of the washing machine, causing drainage issues and error codes like drn. Check the drain hose for any obstructions or incorrect installation to ensure proper water drainage.
System Error
In some cases, whirlpool washer error codes can be the result of system errors within the machine. These errors could be due to electrical malfunctions or software glitches. If you encounter error codes that are not related to load or drainage issues, it’s recommended to contact customer service for further assistance.
“An unbalanced load, bent drain hose, or a system error can trigger whirlpool washer error codes. Proper load distribution, checking the drain hose, and contacting customer service for system errors are essential steps in troubleshooting these issues.”
In order to effectively troubleshoot and resolve whirlpool washer error codes, it’s important to follow the manufacturer’s troubleshooting steps provided in the owner’s manual. Taking appropriate measures to address the root causes of these errors will help ensure the optimal performance of your Whirlpool washing machine.
| Error Code | Cause |
|---|---|
| Sud or Sd | Excessive suds due to unbalanced load |
| drn | Bent or kinked drain hose |
| System Error Codes | Electrical or software malfunctions |
Understanding the causes behind whirlpool washer error codes empowers you to take the necessary steps to resolve them. By addressing issues such as unbalanced loads, bent drain hoses, and system errors, you can ensure the proper functioning of your Whirlpool washing machine.
List of Whirlpool Washer Error Codes and Solutions
Here is a comprehensive list of Whirlpool washer error codes and their corresponding solutions for both front load and top load washers. Whether you’re experiencing issues with draining, system errors, inlet hoses, lid locking or unlocking, slow filling, unbalanced loads, and more, this guide will help you troubleshoot and resolve common problems.
Front Load Washer Error Codes and Solutions
| Error Code | Meaning | Solution |
|---|---|---|
| F8 E1 or LF or LO FL | Low flow of water | Check water supply and ensure proper water pressure. Inspect water inlet valve filters for blockages and clean if necessary. |
| LdL or F5 E2 | Lid fails to lock | Ensure the lid is closed properly and no items are preventing it from locking. Check the lid lock mechanism for any issues and replace if necessary. |
| LdU | Lid fails to unlock | Press the Pause or Cancel button to stop the cycle. Wait for the washer to unlock and then remove the load. Open and close the door again before starting a new cycle. |
| Ofb | Unbalanced load | Pause the cycle, redistribute the load evenly in the drum, and restart the cycle. |
Top Load Washer Error Codes and Solutions
| Error Code | Meaning | Solution |
|---|---|---|
| drn | Washer not draining properly | Check the drain hose for obstructions and ensure it is not kinked or blocked. Verify the drain pump for any clogs and clean if necessary. |
| F# E# or F## | System error code | Unplug the washer for a few minutes, then plug it back in to reset the control board. If the error persists, contact customer service or schedule a service appointment. |
| HC | Hot and cold inlet hoses installed incorrectly | Switch the hot and cold water supply lines to the correct inlets on the back of the washer. Ensure a proper connection and water flow. |
| LdL | Lid not locking | Check the lid lock mechanism for any obstructions or damage. Replace the lid lock if necessary. |
| LdU | Lid cannot unlock | Press the Pause or Cancel button to stop the cycle. Wait for the washer to unlock and then remove the load. Open and close the lid again before starting a new cycle. |
| LF, Lo FL, F8 E1 | Washer filling too slowly | Check the water supply valves to ensure they are fully open. Verify the water inlet hoses for any kinks or restrictions. Clean the inlet valve screens if blocked. |
| OL | Washer load too large | Remove some items from the washer to reduce the load size. Overloading the washer can result in an unbalanced load and may cause the OL error code. |
Remember to refer to your owner’s manual for specific instructions and error code meanings. If the provided solutions do not clear the error or seem too complex to perform, it is recommended to contact a qualified professional or Whirlpool customer service for further assistance.
To provide a visual representation, here’s an image illustrating the error codes and their meanings:
Conclusion
Dealing with Whirlpool washer error codes can be frustrating, but there is hope. By following the right troubleshooting steps, many of these issues can be resolved on your own. However, if the provided solutions do not clear the error code or if the troubleshooting process seems too complex, it is highly recommended to seek the assistance of a qualified professional for washing machine repair service.
Remember, the owner’s manual should always be your go-to resource for specific error codes and instructions. It contains valuable information that can help you better understand the problem and find the appropriate solution. Whether it’s a control lock, detergent cartridge error, or an issue with the washer cycle, the owner’s manual will guide you in the right direction.
In conclusion, while whirlpool washer error codes can be a hassle, they are not insurmountable. Take a deep breath, stay calm, and follow the troubleshooting steps provided. In most cases, you will be able to fix the problem and get your washer up and running smoothly again. Always remember to keep your owner’s manual closeby for reference, and don’t hesitate to seek professional help if needed.
FAQ
What are some common Whirlpool washer error codes?
Some common Whirlpool washer error codes include LOC or LC (Control Lock activated), dET (Detergent cartridge not detected), Int (Cycle paused or canceled), rL or F34 (Items detected in washer during Clean Washer cycle), Sud or Sd (Excessive suds in the washing machine), F5 E2 (Door not locking properly), F7 E1 (Motor speed sensing error), F8 E1 or LO FL (Low flow of water), F8 E2 (Problem with the Dispenser System), and F9 E1 (Longer than expected drain times).
How can I troubleshoot Whirlpool washer error codes?
To troubleshoot Whirlpool washer error codes, follow these steps: For Control Lock error (LOC or LC), touch the Control Lock button or refer to the owner’s manual. For dET error (detergent cartridge not detected), ensure the cartridge is inserted correctly. For Int error (cycle paused or canceled), press pause or cancel twice and the power button once. For rL or F34 error (items detected in the washer during Clean Washer cycle), remove the items and restart the cycle. For Sud or Sd error (excessive suds), use HE detergent and check for restricted drain hose or standpipe. For other error codes, unplug the washer, reconnect after one minute, and reselect the cycle.
What are some common Whirlpool top load washer error codes?
Some common Whirlpool top load washer error codes include drn (washer not draining properly), F# E# or F## (system error code), HC (hot and cold inlet hoses installed incorrectly), LdL (lid not locking), LdU (lid cannot unlock), LF, Lo FL, F8 E1 (washer filling too slowly), and OL (washer load too large).
How do I troubleshoot Whirlpool top load washer error codes?
Troubleshooting steps for Whirlpool top load washer error codes include checking the drain hose, resetting the machine, verifying hose installation, inspecting the lid area, reducing load size, and checking water supply.
What are some common Whirlpool front load washer error codes?
Some common Whirlpool front load washer error codes include F8 E1 or LF or LO FL (low flow of water), LdL or F5 E2 (lid fails to lock), LdU (lid fails to unlock), and Ofb (washer load is unbalanced).
How do I troubleshoot Whirlpool front load washer error codes?
Troubleshooting steps for Whirlpool front load washer error codes include checking water supply, inspecting the lid area, redistributing the load, and ensuring proper balance.
Are there any quick fixes for common Whirlpool washing machine error codes?
Before calling for service, try these quick fixes for common Whirlpool washing machine error codes: Rebalance the laundry load for top-loading machines, reset the machine by unplugging and plugging it back in, and confirm the drain hose is not bent.
What are some common causes for Whirlpool washing machine error codes?
Whirlpool washer error codes can be caused by issues such as an unbalanced load, bent drain hose, and system errors. It’s important to ensure weight distribution in the washer drum, check drain hose installation, and follow troubleshooting steps provided.
Can you provide a list of Whirlpool washer error codes and their solutions?
Sure! Here is a list of Whirlpool washer error codes and their solutions: [insert list of error codes and solutions]
What should I do if none of the troubleshooting steps work for my Whirlpool washer error code?
If none of the provided solutions clear the error code or are too complex to perform, it is recommended to contact a qualified professional for washing machine repair service. Remember to always refer to the owner’s manual for specific error codes and instructions.
Source Links
- https://www.mrappliance.ca/expert-tips/appliance-care/whirlpool-washer-error-codes/
- https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Front_Load_Washers
- https://producthelp.whirlpool.com/Laundry/Washers/Product_Info/Washer_Product_Assistance/Error_Codes_in_Top_Load_HE_Washers