Clicky

How to Reset Samsung Dryer Control Board In 2 Simple Ways!

by

Given that the control board controls all the dryer’s activities, it’s vital that you try resetting it when your Samsung dryer won’t work or starts to malfunction. Here’s how to reset Samsung dryer control board easily.

Turn off the dryer and unplug it from the power source or flip off the circuit breaker for 1 – 5 minutes and then restore power. Alternatively, use the reset button, where applicable, to reset your dryer.

Note that while a reset can fix different issues, such as a non-starting, non-turning, non-spinning, and non-heating dryer, it’s only recommendable when there’s an error code. 

But again, you may need additional troubleshooting if the reset doesn’t fix the problem. So, I’ll walk you through some of these error codes to enable you to troubleshoot them with a reset. 

So, let’s get into it!

how to reset Samsung dryer control board

In a hurry? Here’s a summary of the two dryer reset techniques and the error codes you can reset.

Samsung Dryer Board Reset Techniques Overview

Reset TechniqueHow To Do ItError Codes to Fix 
Hard Reset 













Option 1
Unplug the dryer for 1 – 5 minutes, then restore the power

Option 2
Flip off the circuit breaker, then restore the power







1. Voltage Errors (2E, 9E, 9E1, 9C1)
2. Door Errors (dc, dE, d0, dO, 1df, 1Dc, df)
3. Heating Errors (hE, HC, 1Hc, Hc4)
4. Temp Errors (tE, tc, 1tc, ts, t5, to, t0, tE3, tcs, tc5, 1 tcs, 1tc5)
5. Jammed Buttons Errors (6E, bE, 6E2, bE2, 6c2, bc2)
6. Communication Errors (AC, AE, AE4, AE5, 1AC, Et, EEE, AE3, E3)
7. Vent Blockage Errors (Clg, Cg, C9, CT, c90, c9O, c80, c8O, c19, c8)
8. Frequency Errors (FE, FC, FC1)
9. Sensor Related Errors (oD, 3C, HC2, 1AC7)
Reset Button Technique Press the reset button to reset the dryerSame as above

Samsung Dryer Control Board Troubleshooting Error Codes

As I mentioned, while a reset can fix different dryer issues, it’s only advisable when there’s an error code. Below are the nine most typical error codes on a Samsung dryer that you can troubleshoot by resetting the control board. 

1. Samsung Dryer Voltage Errors

An error code will pop up if something is wrong with your dryer voltage supply. Depending on the model, the voltage error could be any of these:

  • 2E
  • 9E
  • 9E1
  • 9C1

Overall, it’s essential first to check if the dryer is plugged into the wall outlet, not the extension cord, and that it has its dedicated circuit before resetting it. 

Also, ensure the power cable is firmly plugged in and receiving the correct voltage supply (240v at least). If all these boxes check, go ahead and reset the dryer, but if the codes don’t clear, talk to Samsung support. 

2. Samsung Dryer Door-Related Errors 

Sometimes the dryer won’t run or stops mid-cycle because of an issue with the door. It could be that the door won’t latch at all or won’t stay shut after closing. 

Overall, you can tell such issues if any of the errors below pop up:

  • Dc
  • dE
  • do
  • d0
  • 1df
  • 1DC
  • df

Generally, trying to shut the dryer door when you see any of the above errors before doing the reset is essential.

Check if there are obstructions on the door and remove them. Also, inspect the door latch for damage. If it’s broken, consider replacing it. 

3. Samsung Dryer Heating Errors 

If your Samsung dryer won’t get hot, and it’s not a power or voltage issue, it could be a heating issue. So, you can’t discount a voltage issue, but once you do, you’ve to check for possible airflow obstruction. 

Some of the error codes that could point you to include:

  • hE
  • hC
  • 1Hc
  • Hc4

Since these error codes suggest airflow restriction, check the lint screen and vent for obstruction first. 

Clean them if they are clogged and if the error code doesn’t go, reset the dryer. And if the error persists, call Samsung support. 

How do you reset a Samsung Control Board

4. Samsung Dryer Temperature Errors

 Sometimes a Samsung dryer won’t get hot because of a temperature issue. But overall, you’ve to suspect the same issues as in the case of heating errors. So, yes, we are talking about vent and lint screen clogging, and here are the error codes that may pop up:

  • tE
  • tC
  • 1tC
  • Ts
  • t5
  • to
  • t0
  • tE3
  • tcs
  • tc5
  • 1ccs
  • 1tc5

Like in the case of heating errors, check the dryer vent and lint screen for clogging and clean them before resetting the dryer. 

5. Jammed Button Dryer Errors 

The control board will normally detect a stuck button. And when it does, it sends an error code on display. These errors include:

  • 6E
  • bE
  • 6E2
  • 6C2
  • bc2

Check for any stuck buttons on the control panel before resetting the dryer. Once you find it, try pressing it on its side to release it and if the buttons are damaged, call Samsung support. 

6. Samsung Dryer Communication Errors 

For a Samsung dryer to do its job correctly, there must be smooth communication between the various internal components and the control board. 

If communication is lacking, these error codes may pop up:

  • AC
  • AE
  • AE4
  • AE5
  • 1AC
  • Et
  • EEE
  • AE3
  • E3

Just quickly reset your dryer once you identify a communication error. 

7. Vent Blockage Errors 

Depending on the level of vent blockage, a Samsung dryer will display any of these error codes:

  • Clg/Cg (clogged vent but the level unclear)
  • C8/C80 (80% vent blockage)
  • C9/C90 (90% vent blockage)
  • CT (above 1040F or below freezing condition)
  • C1/CL1 (detected clothes in the drum)

Check the dryer vent for possible blockage or obstruction when you notice any of the above errors, and remove it. If the error code doesn’t go away, reset the dryer. 

8. Samsung Dryer Frequency Errors 

If the power frequency is invalid, an error code will pop up. It could be any of these:

  • FE
  • FC
  • 1FC

There’s nothing to check here but to reset your Samsung dryer. And if the error persists, talk to Samsung support. 

9. Sensor / Dryer Component Errors 

Lastly, an error code will pop up if there’s an issue with the dryer component or sensor. The errors to check include the following:

  • oD
  • 3C
  • HC2
  • 1AC7

Consider resetting your Samsung dryer manually when you notice any of those error codes. And if they persist, talk to customer support.

Samsung dryer control board troubleshooting

How to Reset Samsung Dryer Control Board? 

Generally, you can reset a Samsung dryer control board using any of these two techniques:

1. Hard Reset 

A hard reset, which most people call manual reset, is the most popular way of resetting a Samsung dryer. Here’s how to do it:

  • Option 1 (Dryer unplugging) – Turn off the dryer and unplug it for 1 – 5 minutes to clear the electrical charge. Then plug the dryer back and power it on. 
  • Option 2 (Breaker Reset) – Switch off the dryer from its circuit breaker and wait 1 – 5 minutes to clear the electrical charge. Then switch on the breaker to restore power and power it on to run it. 

2. Reset Button Dryer Reset

Though it doesn’t apply to all Samsung dryers, you can reset the control board using the reset button if you can identify it from your manual. You’ll need to press the reset switch to initiate the reset but if you can’t find the reset button, consider the hard reset. 

How to Reset Samsung Dryer to Factory Settings?

If you want to clear existing memory, revert to default settings, or clean an error code, you can factory reset your dryer. That’s another name for a hard reset – which involves unplugging the dryer or turning off its breaker for 1 – 5 minutes. 

The dryer should factory reset once you restore power, and when it doesn’t, contact Samsung support. 

How to Reset Samsung Dryer Error Codes?

You can perform a hard reset or clean an error code from a Samsung dryer. It’s easy! Unplug the dryer from the wall and wait 1 – 5 minutes before restoring power. 

Alternatively, turn off the dryer breaker from the breaker box and wait for 1 -55 m minutes before flipping the breaker back on. 

Samsung Dryer No Power to Control Panel

If your Samsung dryer’s control panel has no power, the dryer won’t turn on or may not stay on if it manages to turn on. Some of the issues that could cause that include:

  • Tripped breaker 
  • Blown fuse
  • Loose power plug
  • Damaged power plug 
  • Failed gas supply 

Fix 

Reset the breaker if it’s tripped, and ensure you firmly plug in the power cord. Test the power cord and fuse with a multimeter. If they lack continuity, replace them. 

Meanwhile, check the gas supply if you have a Samsung gas dryer. And if you can’t fix it, contact Samsung support. 

Samsung dryer no power to control panel

People Also Ask 

1. How Do You Reset a Samsung Control Board?

You can reset a Samsung control board by unplugging the appliance from the power outlet and waiting for about 5 minutes. Then plug back the appliance and restart it. 

Alternatively, quickly switch off the appliance’s circuit breaker for about 5 minutes before switching the breaker on. 

2.  What Buttons Do You Press to Reset a Samsung Dryer?

You can reset a Samsung dryer’s network by pressing Smart Control for about 3 seconds. Stop pressing when the code AP pops up, and when it does, hold down the temp button until the display shows ok, which takes about 7 seconds. 

3. Where Is the Reset Button On the Samsung Front Load Dryer?

Most Samsung dryers don’t have a reset button. You can, however, reset it by unplugging it or switching off its breaker for about 5 minutes before starting it. 

4. Is There a Way to Reset a Samsung Dryer?

Yes, there is a way to reset a Samsung dryer, which involves pulling out its power plug or flipping off its circuit breaker for 1 – 5 minutes. Once you restore power, the dryer should reset (clear any existing error code). 

Closing Thought On How to Reset Samsung Dryer Control Board:

As shared, it’s easy to rest a Samsung dryer control board. You only need to cut off its power supply briefly (1 – 5 minutes) by unplugging it or flipping off the circuit breaker. 

Once you restore its power, the dryer should have a reset. Remember, however, that a reset is recommended when there’s an error code. Don’t hesitate to talk to Samsung support if you cannot reset the error code. 

Also Read:

205 thoughts on “How to Reset Samsung Dryer Control Board In 2 Simple Ways!”

  8. Привет!
    Где приобрести диплом по актуальной специальности?
    Мы предлагаем документы ВУЗов, расположенных на территории всей России. Можно купить качественный диплом от любого высшего учебного заведения, за любой год, указав подходящую специальность и оценки за все дисциплины. Дипломы выпускаются на бумаге самого высшего качества. Это позволяет делать настоящие дипломы, которые не отличить от оригинала. Они заверяются всеми обязательными печатями и подписями.
    Мы готовы предложить дипломы любой профессии по приятным ценам.
    https://diplomasx.com/kupit-diplom-moskva
    Поможем вам всегда!

  70. Okay so I’m to write a creative writing essay on my own personal utopia and what i would like it to be like and all that. I’m having issues starting though. I can’t seem to come up with a good introduction that would lead to my thesis—which i don’t even have..

  81. семена купить интернет магазин с доставкой [url=semenaplus74.ru]семена купить интернет магазин с доставкой[/url] .

  95. Current drug trends. Medicine facts available.
    [url=https://medsonline365.top/46/#]buy lasix online without prescription[/url]
    Administration guidelines here. Current medicine trends.

  108. So I accidentally deleted the joomla folder. But the database its still there untouched..Is it posible that I re-install joomla and connect it with the old database and have all my articles and files back as it was?.

  112. Drug information here. Medication trends described.
    [url=https://medications365.top/trust-online-pharmacy.html]online pharmacy cialis[/url]
    Latest medication updates. Get medicine facts.

  119. Get fast and dependable Washer Dryer Repair Chicago from our team of experts. We specialize in commercial and residential repairs, offering service in Des Plaines, Schaumburg, and Naperville. Trust us for same day service and top-notch maintenance solutions.

  120. Hello there, I found your site by the use of Google at the same time as looking for a related subject, your
    web site got here up, it appears good. I have bookmarked it in my google bookmarks.

    Hello there, simply changed into alert to your weblog through Google,
    and located that it is truly informative. I am going to watch out for
    brussels. I will appreciate if you continue this in future.
    Lots of other people might be benefited out of your writing.
    Cheers!

  121. kdg789 kdg789 kdg789
    Thank you for the auspicious writeup. It in fact was a amusement account
    it. Look advanced to more added agreeable from you! By the way, how can we communicate?

  123. sambal toto sambal toto sambal toto
    Hello There. I found your blog using msn. This is an extremely well written article.

    I will make sure to bookmark it and return to read more
    of your useful info. Thanks for the post. I’ll certainly comeback.

  128. I don’t even understand how I ended up right here, but I assumed this put up was once great.
    I do not realize who you’re however definitely you are going
    to a well-known blogger if you aren’t already. Cheers!

Leave a Comment