What I like most about Samsung washing machines is that they can tell you something is wrong. I’m talking about Samsung washing machine troubleshooting codes, which you can interpret and take action to fix your washer.
Error codes like 1C, LE, 1E, 11C, LC, and 1LC, for example, indicate water leakage, while OE, 0E, 1OC, 10C, OC, and 0C indicate an overflow. Other error codes worth knowing include 4E, 4C, nF or 14C (water filling issues), CE, 4C2, 4E2, nF1, or 14C2 (abnormal water temperature), among others.
We’ll look at these Samsung washer error codes to help you interpret them and take the relevant measures to clear them. Doing that saves you from making a service call, meaning your money stays in your pocket.
Without further ado, let’s dive into the error codes.
In a rush? See below a summary of the most everyday Samsung washing machine error codes.
Summary of The Common Samsung Washing Machine Error Codes
| – | Error Code | Interpretation | Quick Fix |
| 1. | 1C, LE, 1E, LC, 11C and 1LC | Water leakage (low water level) | Fix the source of the leakage or replace the leaky hose |
| 2. | OE, 1E, 1OC, 10C, OC, and 1C | Overflow | Clear kinks from the drain hose and position it 18-96 inches high. If the drain pipe is damaged, replace it |
| 3. | 4E, 4C, nF, and 14C | Water filling issues | Properly connect the supply pipes and clear any kinks |
| 4. | CE, 4C2, 4E2, nF1 and 14C2 | Abnormal water temperature | Disconnect the supply tubes and connect them the right way according to the color code |
| 5. | 5C, 5E, SE, SC, 15C, and nd | Drainage issues | Clear kinks and clogs from the drain hose, replace a damaged hose, and position the drain pipe 18-96 inches high |
| 6. | HE, HC, H1, Hr, 1HC, and HE1 | Water heater issue | Connect the cold and hot water pipes correctly according to their color codes |
| 7. | E2, BE2*, bE2, 6E2, and 8E2* | Jammed button | Gently tap the stuck button on its side to see if it’ll unstick |
| 8. | UC, 2E, 3E*, PF, 9E1, 9E2, 19C1, 19C2, 9C1 and 9C2 | Power voltage failure | Reset the breaker if tripped and reset the washer if there was a power outage |
| 9. | LO, L0, FL, d5, ds, dl, dE1, dE2, dC1, 1dc, 1dc1, dc*, and 1dc4 | Faulty door | Latch the washer door properly and call a service technician if the door is damaged |
| 10. | Ub, Ur, U6, VE, 1U6, dc*, and 1ub | Unbalanced load | Distribute the laundry load evenly in the washing machine and stabilize the washer on the ground |
| 11. | SUd, Sd, 5Ud5, 5UD, 5d, and SUdS | Over Sudsing | Avoid using too much detergent and preferably settle for high efficiency(HE) detergent |
| 12. | 3E, 3C, 3E, 3E4 | Motor issues | Reset the washing machine and select a new program |
| 13. | 9H1, 9E1, and 9E2 | Power fault | Test the power cord, fuse, and socket for continuity and replace the faulty one |
| 14. | tE, tE1 – tE3, and tC1 – tC3 | Temperature sensor issue | Unplug the washer briefly and then restart it |
| 15. | AC, AE, and AC6 | Communication signal fault | Power off the washer and restart it after some seconds |
Top 15 Common Samsung Washing Machine Troubleshooting Codes
Discussed are 15 sets of Samsung washer error codes, their interpretations, and quick fixes:
1. Samsung Washer Error Code 1C, LE, 1E, LC, 11C, or 1LC
Interpretation – Water leakage or low water level
Fix
Since the error code suggests a leakage, look for the source and fix it or replace the leaky pipe. Start by checking the hose behind your washing machine. It shouldn’t be kinked, slack, or fractured. If the hose looks frail or worn out, replace it.
If you cannot locate the leak, run an empty wash cycle (without detergent). If the error clears, then the issue is excess suds.
2. Samsung Washer Error Code OE, 0E, 1OC, 10C, OC, or 0C
Interpretation – Water overflow (the washing machine has too much water)
Fix
The water could be overflowing because the drain hose is improperly positioned or kinked. Thus, straighten out the kinks, and if it’s damaged, replace it. Also, clean the drain pump filter, and keep the drain pipe height at 18-96 inches.
3. Samsung Washing Machine Error Code 4E, 4C, nF, or 14C
Interpretation – Water filling issue (water doesn’t fill the washing machine correctly)
Fix
Ensure the water supply pipes are well connected and there aren’t any kinks. Also, ensure the supply valves are fully open and the drain hose correctly fits into the main drain pipe (not more than 6″).
Note that Samsung washing machine error code 4C may also display when the detergent drawer blocks (by dirt). So, check it and clean it if it’s dirt-clogged.
4. Samsung Washer Error Code CE, 4C2, 4E2, nF1, or 14C2
Interpretation – Abnormal water temperature (water coming out of the cold water supply pipe is too hot)
Fix
The error code comes into effect when you swap the cold and water supply tubes. Therefore, you should disconnect and reconnect the supply tubes the right way. Ensure you match them with the correct color code.
5. Samsung Washer Error Code 5C, 5E, SE, SC, 15C, or nd
Interpretation – Draining issues (the washer’s wastewater is not draining entirely or being slow)
Fix
Look for possible pipe kinking, damage or clogging. Then straighten the kinks, unclog the pipe if clogged, and replace it if it’s damaged. Also, ensure that the drain pipe is 18-96 inches high for the best drainage.
6. Error Code HE, HC, H1, Hr, 1HC, or HE1
Interpretation – Water heater issue
Fix
The error often indicates an interchange between the hot and cold water pipes. So, check their color coding and connect them correctly.
7. Error Code E2, BE2*, bE2, 6E2, or 8E2*
Interpretation – Jammed button (a control panel button might be stuck)
Fix
Consider turning off the washing machine and try to gently press the jammed button to see if it’ll unstick. If the switch is damaged or the error code recurs, have a service call
8. Error Code UC, 2E, 3E*, PF, 9E1 or 9E2
Interpretation – Power/voltage failure
Fix
You will likely have the above error codes during a power outage or when a circuit breaker trips. In the latter case, reset the circuit breaker, and in the former case, reset your washer as soon as the power supply is okay. Do that by unplugging it.
9. Error Code LO, L0, FL, d5, ds, dl, dE1, dE2, dC1, 1dC, 1dC1, dC* and 1dc4
Interpretation – Faulty door (The door is perceived open)
Fix
Since your washing machine perceives the door as open, check it to ensure it’s appropriately latched. You can also inspect the door lock for damage and seek service from a technician if it’s faulty.
10. Error Code Ub, Ur, U6, UE, 1U6, dc*, or 1Ub
Interpretation – Unbalanced load (load is not even in the washer)
Fix
You can clear the above error codes by distributing the clothes evenly in the washing machine. It may also help to place the washer on an even surface to avoid unnecessary vibrations. The vibrations could be the reason the load is falling out of balance.
11. Error Code SUd, Sd, 5Ud5, SUdS, 5d, or 5ud
Interpretation – Over Sudsing (using too much detergent)
Fix
Since the error code indicates excessive suds formation, reduce the amount of detergent. Consider using high efficiency (HE) detergent as they are low on suds.
12. Error Code 3E, 3C, 3E, or 3E4
Interpretation – Motor issue (motor malfunctioning)
Fix
Given that the error indicates a motor problem, consider setting the washer by switching it off and unplugging it for 60 seconds. Then try switching it on and pick a new program. If the error code recurs, talk to a service technician.
13. Error Code 9H1, 9E1, or 9E2
Interpretation – Power fault (faulty socket, fuse, or power cable)
Fix
Check the socket, the fuse, and the power cable for faults. Consider testing them for continuity using a multimeter. If any fails to display continuity, replace them.
14. Error Code tE, tE1 – tE3 or tC1 – tC3
Interpretation – Temperature sensor issue
Fix
You can fix this error by switching off the washing machine and restarting it after 60 seconds. Once it restarts, choose a new program.
15. Error Code AC, AE, or AC6
Interpretation – Communication signal fault
Fix
In most cases, the washing machine clears the error code itself after a few minutes. But if the error won’t clear, turn off the washer and restart it after a few seconds. If the error doesn’t clear, talk to an expert technician.
Other Troubleshooting Codes and Samsung Washing Machine Problems Solutions
Also, consider these additional codes on your Samsung washing machine:
- Cb or C6 (calibration mode) – Often, this error shows the washer is self-recalibrating. Thus, allow the washer some time to recalibrate.
- CL (Child Lock) – The error displays when you activate the ‘Child Lock’ safety feature. So, you only need to deactivate the safety feature when you want to use the washer, and the code will disappear.
- FE (fan motor error) – The error indicates a problem with the fan motor. So, check for possible faults, but if you cannot find any, call a Samsung service technician.
- DN (downloading) – The error code indicates the Samsung washer is updating software. So, allow the washer to complete downloading updates.
- HOT (the washer is too hot) – This error shows the washer is heating up, but it’s not an alarming fault. It usually clears after some time.
- 1E, 1SF, SF1-SF3, SF, 5F, and 5F1-5F3 (system error) – Consider resetting the washer (you can unplug it briefly) to clear the system error. If the error doesn’t clear, call a technician.
Samsung Top Loader Washing Machine Error Codes Summary
Here are the errors shared earlier associated with the Samsung top loader:
- 1E (water leakage/faulty water level sensor)
- 3E (Defective motor tach)
- E2 (jammed key)
- uD (drainage problem)
- uF/nF1 (water supply problem)
- AE (Signal communication fault)
- nF/nF1 (water supply problem)
- AE (signal communication fault)
- LE (water leakage)
- OE (overflow)
- dc (unbalanced load)
- sd/sud (too much suds)
- PE/PE1 (faulty clutch motor)
- tE1 (abnormal temperature)
Samsung Front Load Washing Machine Troubleshooting Codes Summary
Here are the error codes shared earlier associated with Samsung front loaders.
- FL/LO (faulty door lock)
- Dc (load imbalance)
- FFO/ sud (excessive suds)
- OE (overflow)
- Ud (drainage issue)
- E2 (jammed keys)
- AE (communication signal fault)
- Hr (water heater issue)
- 2E (power failure/ faulty electronic control board)
- 3E (motor issue)
- tE (temperature sensor fault)
- uF1 (abnormal water temperature)
- LE (water leakage)
- Uf (water filling issues)
Is there a suggestion for supporting the site mentioned in the passage?
Yes, in the provided excerpt, there is a suggestion for supporting the site mentioned. The suggestion is to consider making a donation in order to show appreciation for the benefits received from the site.
Are there any similar threads on the forum related to Samsung washers?
Yes, there are similar threads on the forum related to Samsung washers. Some of the related threads include discussions on issues like the Samsung Front Load Washer Model WF45A6400AV/US not showing any signs of life, the Samsung washer WF330ANW/XAA 02 displaying a 3E1 error, and the Samsung WF438AAR/XAA Front Load Washer showing a TE error code.
What has the user already replaced in an attempt to fix the issue?
The user has already replaced the door lock, tested and replaced the control board (PCB), and also replaced the transformer (harmonic). However, despite these replacements, the issue remains unresolved as the same error code reoccurs after running the appliance for five loads.
What is the user unsure about regarding the next steps to take in fixing the washer?
What is the user’s concern about replacing the washer?
The user loves this washer and it matches their dryer, so they do not want to replace it as the new unit style looks awkward.
What part should the user consider replacing next in fixing the washer?
The user is unsure if the problem lies with the PCB (Printed Circuit Board) or the control board.
“Given that the error indicates a motor problem, it is recommended to try a simple solution first. Consider setting the washer by switching it off and unplugging it for 60 seconds. This can help reset the system and clear any temporary glitches. After the 60 seconds, try switching it on again and pick a new program to see if the error code recurs. If the error persists, it may be necessary to consult with a service technician for further assistance.”
“To ensure that the issue is not related to power supply, it is advised to check the socket, the fuse, and the power cable for any potential faults. Using a multimeter, you can test these components for continuity. If any of them fail to display continuity, it is recommended to replace them to ensure proper power flow to the washer.”
“While the above troubleshooting steps can resolve many common issues, it is important to note that every situation may vary. In some cases, the washing machine may clear the error code itself after a few minutes. However, if the error persists and doesn’t clear on its own, it is advised to turn off the washer and restart it after a few seconds. If the error still doesn’t clear, it is recommended to seek the expertise of a professional technician who can diagnose and address the problem accurately.”
“In addition, you may also consider resetting the washer by briefly unplugging it to clear any system errors. However, if the error code continues to appear even after resetting, it would be wise to contact a qualified technician who can provide further guidance and assistance in resolving the issue.”
Therefore, the user is unsure about the specific steps to take in fixing the washer and may need to consult a service technician for further assistance. It is important to consider the unique circumstances of the situation and seek professional help if the issue persists.”
Closing Remarks on Samsung Washing Machine Troubleshooting Codes:
Now you have the most everyday Samsung washing machine error codes, their meaning, and how to clear them. So, try to consider the fixes before calling an expert Samsung technician. Of course, calling a service technician is highly advisable if it involves a major repair.
Also Read: