Maytag Neptune Dryer Control Panel Not Working (5 Issues Fixed)

The last thing your want is your Maytag Neptune dryer control panel not working. Do you know why? Not only won’t you be able to change the settings or control the dryer, but the dryer may also fail to start.

The Maytag Neptune control panel may fail to work in different ways. Sometimes, the control panel has no power, is blank (without display), won’t work but the dryer lights up, or is non-responsive (stops the dryer from starting). At other times, the control panel freezes.  

So any of those five problems, which I’ll cover in detail, will prevent the control panel from working. And if it doesn’t work, it may also be hard for the control board to work as the two are inter-reliant.

However, note that just because the control panel isn’t working doesn’t mean it’s faulty. Sometimes the fault has nothing to do with the control panel but other issues, such as the power supply and the control board.

I’ll help you know what to check depending on the control panel problem and possibly fix it. So, let’s jump into it.

In a hurry? Below are the five Maytag Neptune dryer control panel problems you can troubleshoot.

Quick Troubleshooting Guide for a Maytag Neptune Dryer Control Panel Not Working

5 Common Maytag Neptune Dryer Control Panel Problems

Now, if your Maytag Neptune dryer control panel isn’t working, consider these five problems:

1. Maytag Neptune Dryer Control Panel Has No Power

The control panel won’t turn on without power, and the Neptune dryer won’t start. If so, the problem could be:

a) Failed power supply

It could be that your dryer is not getting any power and so the control panel won’t light up. Issues that might contribute to that include:

• Unplugged or faulty power cord – The dryer won’t power on if it’s loose (unplugged) or defective.
• Blown-up fuse – The fuse blows up when the dryer overheats and can prevent it from powering on.
• Faulty outlet – If the outlet or socket is defective, the dryer won’t get any power and will, therefore, not power on.
• Tripped breaker – The breaker may fall during a power surge and cut off the Maytag Neptune’s power supply.

Fix

Check the power cord to ensure it’s well plugged in, and use a multimeter to check its continuity. The absence of continuity means it’s faulty; thus, replace it.

Also, use a multimeter to check if the thermal fuse and socket have continuity. If any of them lacks it, replace it. And lastly, inspect the circuit breaker. If it’s OFF, reset it.

b) Dead control panel or main control board

The control panel relays electric signals to the main control board whenever you press the electronic controls on the dryer. The main control board, in turn, acts on the input and allows the dryer to perform a given command.

If the main control panel is defective, the control board won’t receive any signal, which means the dryer won’t power up or do anything else. Likewise, if the control board is faulty, the dryer will not work.

Fix

Diagnosing a dead control panel or main control board is never easy. Therefore, you may want to consult an expert to help replace either board. But before you do, consider resetting the dryer.

Here’s how to perform a Maytag Neptune dryer control panel reset:

• Press Power/Cancel (2 times), re-select a New Cycle and run it
• Alternatively, unplug the dryer for 5-10 minutes or flip the breaker off for the same period
• If the dryer usually starts and the control panel starts working, the reset is successful

2. Blank Maytag Neptune Dryer Control Panel (No Display, Messages, or Error Codes)

Sometimes the dryer will power on, but the control panel will fail to display anything. In that case, the display panel is blank – it won’t show any messages, error codes, or light.

That’s likely to happen if the control board is faulty.

Fix

Before you can replace the control board, which is likely to be faulty, consider resetting the control panel and, in the process, cleaning its contacts.

Only replace the control board when the Neptune dryer reset and cleaning fails.

3. Maytag Neptune Control Panel Not Working but Dryer Lights Up

Sometimes the dryer’s interior lights come on when the door opens and go out when the door closes. That’s likely to happen due to any of these reasons:

• Blown-up fuse – The dryer may power on but fail to start and display anything due to a blown-up fuse. As mentioned earlier, you can check if it’s faulty using a multimeter.  
• Faulty start button – If the start button is defective, the dryer may power on but won’t run. You can check if it’s defective using a multimeter.
• Faulty door switch – The door switch will also prevent the dryer from running, and you can check if it’s defective using a multimeter.
• Broken drive belt – Sometimes, a damaged drive belt stops the dryer from running. So, you ought to inspect it.
• Malfunctioning timer – If the timer is malfunctioning, it will relay the wrong information, which could prevent the control panel from displaying anything. You can check it with a multimeter.
• Dead control board – And lastly, the control panel won’t receive any signal from a dead control board.

Fix

Replace the fuse, start button, door switch, or timer if any of the four lacks continuity. And if your dryer’s drive belt looks faulty, replace it as well.

4. Non-Responsive Maytag Neptune Dryer Control Panel

Sometimes, the Maytag Neptune dryer won’t start due to a non-responsive control panel. So, it’s not always about failed power; you also have to check the control panel.

Overall, the control panel may become non-responsive in the following ways:

• When you touch it with wet hands
• When you touch the control panels with your fingernails instead of the fingertips
• Active Control Lock – It locks the control panel, preventing the dryer from unintentionally starting or setting changes

Fix

Learn to dry your hands before touching the electronic controls on the control panel. Also, touch the panel with your fingertips and not your fingernails.

And if Control Lock is on, disable it. Do that by pressing the Cycle Signal button for 3 seconds.

5. Maytag Neptune Dryer Control Panel Frozen

Lastly, the Maytag Neptune dryer control panel may sometimes freeze. That means the control panel doesn’t allow you to change the settings, and sometimes the dryer won’t start.

If so, the issue could be a faulty door switch, control panel, or main control board. So, you may want to inspect the three for faults.

Fix

Replace the door switch, control panel, or main control board. An expert can help you diagnose the last two, but you can tell a faulty door switch if it has no continuity.

Let’s discuss replacing the control panel and the main control board.

Maytag Neptune Dryer Control Panel Replacement (Plus Control Board Replacement)

The Supplies:

• Screwdriver
• New control panel
• New control board

The Steps

Here is how to replace the control panel and the control board of a Maytag Neptune dryer without an expert:

• Turn off the dryer and disconnect it from the wall outlet to avoid electrocution
• Unscrew the dryer’s top part to access the control panel
• Take out the faulty control panel
• Take out the main control board (if it’s the one you are replacing)
• Fit the new control panel or main control board, depending on what you are replacing
• Put everything back and re-plug the dryer
• Turn on the dryer and test it to see if the control panel is working

People Also Ask

1. Why is My Maytag Neptune Dryer Not Turning On?

Your Maytag Neptune dryer won’t turn on if it’s not getting any power. The reason for that could be a tripped breaker, unplugged or broken cord, faulty power socket, or a blown-up fuse.

Other issues that may prevent your dryer from turning on include a faulty power button or door switch, a non-responsive control panel, Control Lock, or the wrong dryer setting.

2. Is There a Fuse in A Maytag Neptune Dryer?

Yes, a Maytag Neptune dryer has a fuse, and you can locate it in the blower housing. This fuse protects the dryer from electrical faults and surges.

3. How Do I Reset My Maytag Dryer’s Control Panel?

You can reset the Maytag dryer’s control panel by unplugging the dryer for 5-10 minutes or even more or flipping the breaker off for the same period. Alternatively, press the reset button on the control panel (not all Maytag dryers have the reset button, though).

What are the appliance types and brands supported by the parts?

The appliance types supported by this OEM replacement part include flat style dryers. These parts are compatible with several well-known brands such as Whirlpool, Maytag, Frigidaire, Jenn Air, Crosley, Admiral, Norge, Magic Chef, and Kenmore.

What are the matching model numbers for the parts?

The matching model numbers for the parts are:

– MAH3000AAW (Washer)
– MAH3000AEW (Washer)
– MAH3000AGW (Washer)
– MAH3000AKW (Washer)
– MAH3000AWA (Washer)
– MAH3000AWQ (Washer)
– MAH3000AWW (Washer)
– MAH3000BGW (Washer)
– MAH4000AWQ (Washer)
– MAH4000AWW (Washer)
– MAH4000BWQ (Washer)
– MAH4000BWW (Washer)
– MAH6700AWM (Washer)
– MAH6700AWW (Washer)
– MDE5500AYQ (Dryer)
– MDE5500AYW (Dryer)
– MDE5500AZQ (Dryer)
– MDE5500AZW (Dryer)
– MDE6000AUW (Dryer)
– MDE6000AYQ (Dryer)
– MDE6000AYW (Dryer)
– MDE6000AZQ (Dryer)
– MDE6000AZW (Dryer)
– MDG5500AWQ (Dryer)
– MDG5500AWW (Dryer)
– MDG6000AWQ (Dryer)
– MDG6000AWW (Dryer)
– MDG6000AXW (Dryer)
– MDG6000BWQ (Dryer)
– MDG6000BWW (Dryer)

What are the symptoms that the Hi-Limit Thermostat fixes?

The Hi-Limit Thermostat addresses a range of issues, including the dryer becoming excessively hot, a lack of heat or insufficient heat, and extended drying times. By replacing this component, these symptoms can be effectively resolved.

How can I check the delivery date of the Hi-Limit Thermostat?

To check the delivery date of the Hi-Limit Thermostat, simply add the item to your cart. The delivery date will be displayed once the item is in your cart.

What is the MFG Number of the Hi-Limit Thermostat?

The MFG Number of the Hi-Limit Thermostat is WP303396. This number is specifically assigned to the OEM replacement part used in both Maytag gas and electric clothes dryers. The Hi-Limit Thermostat plays a crucial role in ensuring the safe operation of your dryer by regulating the internal temperature. When the temperature inside the dryer reaches 200 degrees Fahrenheit, this thermostat will automatically cut off the heating element. It will then resume operation once the temperature drops back down to 170 degrees Fahrenheit.

What is the quantity available for the Hi-Limit Thermostat?

The quantity available for the Hi-Limit Thermostat is 100, as indicated by the “QuantityAdd to Cart (100)” provided in Excerpt

What is the price of the Hi-Limit Thermostat?

According to the provided information, the Hi-Limit Thermostat is priced at $25.20. This price is listed as “Our Price” in the passage. Additionally, it is mentioned that the Hi-Limit Thermostat is being offered at a discounted rate compared to its usual price of $40.86, resulting in a savings of $15.66.

What are the compatible brands for the Flat Style Dryer Igniter?

The Flat Style Dryer Igniter is a genuine OEM replacement part that is compatible with a range of gas dryers, including Whirlpool, Maytag, Frigidaire, Jenn Air, Crosley, Admiral, Norge, Magic Chef, and Kenmore.

How can I check the delivery date of the Flat Style Dryer Igniter?

To check the delivery date of the Flat Style Dryer Igniter, simply add the item to your cart. Upon doing so, the website will display the estimated delivery date for your convenience.

When will the Flat Style Dryer Igniter be shipped?

The Flat Style Dryer Igniter, which is an OEM replacement part compatible with Whirlpool gas dryers, is currently in stock and ready to be shipped. If you place your order before Monday, it will be guaranteed to ship on Monday. To find out the exact delivery date, simply add the item to your cart and the delivery date will be displayed.

What is the MFG Number of the Flat Style Dryer Igniter?

The MFG Number of the Flat Style Dryer Igniter is 4391996. This igniter is specifically designed as an OEM replacement part that is compatible with a range of gas dryers, including Whirlpool, Maytag, Frigidaire, Jenn Air, Crosley, Admiral, Norge, Magic Chef, and Kenmore. Its primary function is to ignite the gas, thereby generating the necessary heat for your dryer. The package includes the igniter, a mounting screw, and two wire connectors, which can be useful in case the original plug differs from the one provided. It is important to note that when handling the igniter, care should be taken to handle it by the white section and avoid touching the gray portion.

Are there any customer stories related to the Belt Tension Pulley?

Yes, there is a customer story related to the Belt Tension Pulley. One customer named Sandy R. from Manhattan, KS shared their experience with a dryer squealing on startup. In September 2015, Sandy replaced the belt, belt tension pulley, both dryer drum roller axles, and both drum support rollers. They mentioned purchasing two tumbler bearing kits but saving them for future use since the existing ones were still in good condition. Sandy also found the instructional videos helpful and took pictures during the disassembly process to ensure proper reassembly. They highlighted some models having extra terminals near the sensor terminals and advised others to be cautious, inspect closely, and take pictures while disassembling.

What symptoms does the Belt Tension Pulley fix?

The Belt Tension Pulley addresses several symptoms in various appliances. If you encounter unusual noises like squeaking or squealing, an appliance that refuses to start or function properly, a dryer drum that spins slowly or not at all, a drive belt slipping off or getting damaged, visible wear, damage, or wobbling of the pulley, or excessive vibration during operation, then the Belt Tension Pulley could be the solution to your problem.

What is the function of the Belt Tension Pulley?

The Belt Tension Pulley serves as a crucial component in Whirlpool-brand appliances. Its primary function is to maintain the proper tension on the drive belt, which is essential for the smooth operation of the appliance. By ensuring that the drive belt remains taut and securely in place during use, the pulley helps to prevent any slippage or dislodgment that could disrupt the appliance’s functionality. Moreover, the pulley includes a bearing that aids in facilitating the smooth rotation of the drive belt. This smooth and controlled rotation reduces friction and wear on both the belt itself and the other components within the appliance’s drive system. Overall, the Belt Tension Pulley plays a vital role in maintaining the optimal performance and longevity of Whirlpool appliances by effectively managing the tension and motion of the drive belt.

What is the price of the Belt Tension Pulley?

The price of the Belt Tension Pulley is $19.12. It is being compared to a price of $22.56, which means you save $3.44 by purchasing it.

Are there any customer stories related to the Dryer Drum Roller Axle?

Yes, there are customer stories related to the Dryer Drum Roller Axle. One customer explained how they replaced the belt, belt tension pulley, both dryer drum roller axles, and both drum support rollers in their dryer. They mentioned that they even bought extra tumbler bearing kits, but decided to save them for when they are needed in the future. They found helpful videos that guided them throughout the process and also took pictures of the wiring to ensure everything was reassembled correctly. The customer also mentioned that some models might have extra terminals near the sensor terminals, so they advised others to pay close attention to this detail and take pictures for reference during disassembly.

What symptoms does the Dryer Drum Roller Axle cause?

The symptoms of a faulty Dryer Drum Roller Axle typically include squeaking or rumbling sounds during operation, an uneven or jerky rotation of the drum, and excessive vibration while the dryer is in use.

What causes a bad Dryer Drum Roller Axle?

There are several factors that can contribute to a bad dryer drum roller axle. Firstly, consistent usage and normal wear and tear over time can lead to the deterioration of the axle. Additionally, overloading the dryer with heavy items or excessive loads can put undue strain on the drum roller axle and cause it to fail. Finally, neglecting regular maintenance such as lubricating the axle or ensuring proper alignment can also result in a bad drum roller axle.

What is the price of the Dryer Drum Roller Axle?

The price of the Dryer Drum Roller Axle is $9.82. This is the price we are offering, which is a savings of $1.87 compared to the original price of $11.69.

What symptoms does the Flame Sensor fix?

The Flame Sensor fixes various symptoms related to the heating functionality of the dryer. These symptoms include: inefficient heating, premature shut-off, lack of heat or insufficient heat, and excessively long drying times.

What is the function of the Flame Sensor?

The Flame Sensor is a crucial component found in Whirlpool gas dryers that serves the purpose of ensuring the safe and proper ignition of the burner. Acting as an OEM replacement part, this sensor plays a vital role in preventing potential fire hazards.

Functionally, the flame sensor operates by detecting the presence of a flame within the burner assembly. Its primary responsibility is to confirm that a flame has been successfully ignited. If, for any reason, the sensor fails to detect the flame, it promptly sends a signal to the gas valve, instructing it to shut off. This immediate shutdown prevents the accumulation of gas within the dryer, significantly reducing the risk of fire and ensuring the safety of both the appliance and the surrounding environment.

What is the price of the Flame Sensor?

The price of the Flame Sensor, which is a compatible OEM replacement part for Whirlpool gas dryers, is currently $40.70. This price is being compared to the original price of $48.84, resulting in a savings of $8.14 for customers.

Are there any customer stories related to the Tumbler Bearing Kit?

Yes, there have been customer stories related to the Tumbler Bearing Kit. One customer mentioned that they replaced the belt, belt tension pulley, dryer drum roller axles, and drum support rollers. They also mentioned purchasing two tumbler bearing kits, although they only used one as the existing tumbler bearings were still in good condition. In order to ensure a smooth reassembly process, they took pictures of the wiring and made careful note of where everything goes. Additionally, the customer noted that some models have extra terminals near the sensor terminals, emphasizing the importance of being attentive and observing these details while disassembling and reassembling the dryer.

What are the symptoms of a bad Tumbler Bearing Kit?

Symptoms of a Bad Tumbler Bearing Kit can include the following:

1. Unusual Noise: When the tumbler bearing kit is faulty, you may hear unusual noises during the operation of your appliance. These noises can range from grinding or squeaking sounds to loud banging or clunking noises.

2. Drum Misalignment: Another symptom of a bad tumbler bearing kit is the improper rotation or misalignment of the drum. You may notice the drum not rotating smoothly or experiencing jerky movements during operation.

3. Excessive Vibration: A faulty tumbler bearing kit can cause increased vibration in your appliance. You might feel excessive shaking or vibrating coming from the drum, which can be a sign of bearing failure.

4. Burning Smell: In some cases, a bad tumbler bearing kit can result in increased friction between moving parts. This can lead to a burning smell emanating from the appliance, indicating that the bearings are overheating or wearing out.

5. Clothes Not Drying Properly: When the tumbler bearing kit is failing, it can affect the overall performance of the appliance. If you notice that your clothes are not drying properly, taking longer than usual, or coming out damp, it could be a sign of a faulty bearing kit.

6. Excessive Wear and Tear: Inspecting the tumbler bearing kit visually can also help identify issues. If you notice excessive wear and tear, visible damage, or parts of the bearing kit breaking or coming apart, it is an indication that the kit needs to be replaced.

It is important to note that these symptoms may vary depending on the specific make and model of your appliance, so consulting the manufacturer’s guidelines or seeking professional assistance is recommended for an accurate diagnosis.

What is included in the Tumbler Bearing Kit?

The Tumbler Bearing Kit includes the following items:

1. Cork Bearing Pad: This pad is designed to provide support and stability to the drum of the dryer.

2. Glide: The glide is another component that aids in the smooth movement of the dryer drum. It helps reduce friction and allows the drum to rotate freely.

3. Rivets: The kit includes two rivets, which are necessary for installation. However, using a rivet tool is required to properly secure the components.

Please note that this kit is specifically designed for the front of the dryer, and it is recommended to replace both bearings simultaneously for optimal performance. The kit is sold individually. In case you require rear drum support rollers, please order the 12001541 separately.

What are the features and benefits of the Tumbler Bearing Kit?

The Tumbler Bearing Kit is designed to enhance and maintain the performance of your Whirlpool dryer. With its authentic OEM replacement part, it is compatible with a range of Whirlpool dryer models. Here are the key features and benefits of using this kit:

1. Friction Reduction: The Tumbler Bearing Kit is specifically designed to reduce friction during drum rotation. By minimizing the resistance encountered when the drum spins, it ensures smoother and more efficient operation of your dryer. This not only enhances the overall performance but also helps to prolong the lifespan of the appliance.

2. Noise Reduction: Another important benefit of the Tumbler Bearing Kit is its ability to minimize the noise generated during the operation of your dryer. The kit is designed to dampen vibrations and reduce any rattling or squeaking sounds that may occur during the drying cycle. This not only provides a more pleasant user experience but also enhances the quietness of the appliance.

By incorporating the Tumbler Bearing Kit into your Whirlpool dryer, you can enjoy smoother drum rotation, improved performance, and a reduction in noise levels. This kit ensures that your appliance continues to operate at its best, providing you with efficient and quiet drying cycles.

What symptoms can be fixed by replacing the Dryer Drum Belt?

By replacing the Dryer Drum Belt, you can effectively address various symptoms, including:

1. Dryer drum not tumbling: If you notice that the dryer drum is not rotating or tumbling while the motor is still functioning, replacing the Dryer Drum Belt can help resolve this issue. The belt is responsible for connecting the drum to the motor, enabling it to rotate and efficiently dry your clothes.

2. Excessive noise during operation: A worn-out or damaged dryer drum belt can cause loud squeaking or scraping noises when the dryer is in use. By replacing the belt, you can eliminate these noises and restore smooth and quiet operation.

3. Drum spinning irregularly or stopping mid-cycle: A faulty belt may result in the dryer drum spinning inconsistently or stopping abruptly during a drying cycle. This malfunction can be rectified by installing a new Dryer Drum Belt, ensuring the proper connection between the drum and motor for continuous and uninterrupted operation.

4. Inadequate drying performance: An old or stretched-out belt can cause insufficient heat distribution, resulting in poor drying performance. By replacing the Dryer Drum Belt, heat will be evenly distributed across the drum, allowing for efficient drying of your clothes.

Remember, addressing these symptoms by replacing the Dryer Drum Belt can help maintain the optimal functionality and performance of your dryer, ensuring that your laundry is dried effectively and efficiently.

Are there any customer stories or reviews related to the Drum Support Roller?

Yes, there are customer stories related to the Drum Support Roller. One customer, Sandy R. from Manhattan, KS, shared their experience with repairing their dryer. They mentioned replacing the belt, belt tension pulley, both dryer drum roller axles, and both drum support rollers. Sandy also mentioned buying extra tumbler bearing kits, saving them for future use when needed. They found the instructional videos to be fantastic and even took pictures during the repair process to ensure proper reassembly. They also mentioned that some dryer models have extra terminals near the sensor terminals, advising others to be aware and pay close attention during disassembly. Overall, Sandy’s story highlights the importance of proper maintenance and the effectiveness of the replacement parts in keeping the dryer running smoothly.

Are there any customer stories or reviews related to the Dryer Gas Valve Coil Kit?

Customer Review: Dryer Gas Valve Coil Kit

“I recently purchased the Dryer Gas Valve Coil Kit for my dryer and I have to say, it made a significant difference in its performance. Prior to installing this replacement part, my dryer was having trouble heating up properly and it was taking forever to dry my clothes. I decided to give this kit a try after reading positive reviews online and I’m so glad I did.

The installation process was straightforward, with clear instructions provided. I followed along with a helpful video tutorial that gave me step-by-step guidance. It took me less than an hour to complete the installation, and I was impressed with how well the kit fit perfectly into my dryer. The quality of the coils was evident, and it gave me confidence that this replacement part would last.

After installing the Dryer Gas Valve Coil Kit, I immediately noticed a difference in how quickly my dryer heated up. It now reaches the desired temperature much faster, which has significantly reduced drying time. Not only am I saving time, but I’m also saving on energy costs.

I am also happy to report that the dryer has been running smoothly since the installation. The coils are working perfectly, providing a consistent and reliable source of heat. I haven’t experienced any issues or malfunctions since the replacement, and it has brought back the efficiency and effectiveness of my dryer.

In conclusion, I highly recommend the Dryer Gas Valve Coil Kit for anyone experiencing heating problems with their dryer. It is a reliable and durable replacement part that offers improved performance and energy efficiency. With clear instructions and easy installation, it is a great option for DIY enthusiasts. Don’t let a faulty gas valve coil disrupt your laundry routine. Trust this kit to repair your dryer and bring back its optimal performance.”

What symptoms can be fixed by replacing the Dryer Gas Valve Coil Kit?

The Dryer Gas Valve Coil Kit can effectively address various symptoms within your dryer. By replacing this kit, you can resolve issues such as the timer not advancing properly, an insufficient amount of heat being produced, and the dryer shutting off prematurely.

Is the Dryer Gas Valve Coil Kit in stock and when will it be shipped?

Yes, the Whirlpool Dryer Gas Valve Coil Kit is currently available in our inventory and will be sent out for shipping on Monday. To determine the exact delivery date, please add the item to your cart where the information will be displayed.

Are there any customer stories or reviews related to the Dryer Cycling Thermostat?

Yes, there are customer stories and reviews related to the Dryer Cycling Thermostat. One customer, Michael M. from Brunswick, GA, shared his experience with a 22-year-old Kenmore (Whirlpool) dryer that had stopped getting hot. He decided to repair it himself after watching instructional videos.

In his review, Michael mentioned that while the only part that failed the Ohm test was the thermal fuse, he decided to go ahead and replace the heating element and the cycling thermostat since he had already taken the dryer apart. He provided a detailed rundown of the steps he took, including removing the back of the dryer and vacuuming.

While Michael’s review didn’t explicitly mention the Dryer Cycling Thermostat as the specific component he replaced, his decision to replace it suggests that it might have been a potential cause for the lack of heat in his dryer. His successful DIY repair story serves as a testament to the possibility of resolving heating issues in dryers by replacing components like the Dryer Cycling Thermostat.

Can I install the Dryer Cycling Thermostat myself?

Yes, absolutely! The Dryer Cycling Thermostat is designed to be conveniently installed by anyone without the need for any extra hardware or tools. You’ll be able to successfully install it on your own without any difficulties.

What symptoms can be fixed by replacing the Dryer Cycling Thermostat?

Replacing the Dryer Cycling Thermostat with our high-quality OEM replacement part can effectively address various symptoms in your dryer. If your dryer is exhibiting any of the following indicators, it may be time to consider testing and replacing the cycling thermostat to ensure the ongoing smooth and safe operation of your appliance:

1. Excessive heat: If your dryer is becoming too hot, to the point where it may pose a risk or damage your clothes, replacing the cycling thermostat can help regulate the temperature and prevent overheating.

2. Timer not advancing: If you notice that the timer on your dryer is not progressing or moving forward as it should, it may be due to a faulty cycling thermostat. Replacing this part can restore the proper functioning of the timer.

3. Extended drying time: If your dryer is taking longer than usual to dry your clothes, it could be an indication of an issue with the cycling thermostat. Replacing it can help optimize the drying process and reduce unnecessary delays.

By addressing these symptoms and replacing the cycling thermostat with our reliable OEM replacement part, you can effectively resolve these issues and ensure the continued smooth and safe operation of your dryer.

What are the parts available for Maytag Neptune Dryer Control Board?

For Maytag Neptune Dryer Control Board, there are several parts available to ensure efficient and safe operation. Here are some of the essential components:

1. Dryer Cycling Thermostat: This OEM replacement part regulates the temperature in your dryer to prevent overheating and potential fire hazards. It ensures that the dryer doesn’t get too hot or too cold during a cycle. If you notice symptoms such as excessive heat, the timer not advancing, or prolonged drying time, it may be time to replace the cycling thermostat.

2. Dryer Gas Valve Coil Kit: This kit is specifically designed for Maytag Neptune gas dryers. It includes coils that ensure the gas valve opens at the appropriate temperature for safe operation, eliminating the risk of gas buildups. If you experience issues like the timer not advancing, no heat, or the dryer shutting off too soon, replacing the gas valve coil kit may solve these problems.

3. Drum Support Roller: The Whirlpool Drum Support Roller is an OEM replacement part that helps in maintaining the stability and smooth rotation of the dryer drum. If you hear loud banging or thumping noises, notice a wobbly drum, or experience difficulty spinning, it may indicate a faulty drum support roller. Replacing it will restore your dryer’s performance and prevent further damage.

4. Dryer Drum Belt: The dryer drum belt is a crucial component that connects the motor pulley to the drum, enabling the drum to spin. If your dryer drum isn’t tumbling while the motor is running, it may be due to a broken belt. The OEM Replacement Dryer Drum Belt is designed to provide top performance and durability. The belt has 4 grooves, 5 ribs, a width of 5/16″, and a length of 91 5/8″. Ensure you unplug your dryer and follow proper installation instructions to replace the belt.

These are just a few of the parts available for the Maytag Neptune Dryer Control Board. Selecting the appropriate parts based on your model number is important to ensure compatibility and optimal performance.

Closing Remarks On the Maytag Neptune Dryer Control Panel Not Working:

Now you know the five issues to check when the control panel of your Maytag Neptune dryer is not working. The troubleshooting depends on the issue, and the above guide can help you address it. But if you can’t do it, consider a dryer expert’s help.