If you see the LOC code or LC code on your Whirlpool washer, it means that the control lock feature has been activated. This feature prevents you from making any changes or operating the washer while it is working. To deactivate the control lock, you can press and hold the Control Lock/Unlock button for 3 seconds. If this doesn’t work, you can try pressing the POWER button first, then holding the Control Lock/Unlock button. You can consult your owner’s manual for more information on setting the control lock.
Key Takeaways:
- When your Whirlpool washer displays the LOC code or LC code, it means the control lock feature is activated.
- To deactivate the control lock, press and hold the Control Lock/Unlock button for 3 seconds.
- If pressing the Control Lock/Unlock button doesn’t work, try pressing the POWER button first, then holding the Control Lock/Unlock button.
- Refer to your owner’s manual for specific information on the control lock feature.
- For persistent LOC code issues, it’s recommended to seek professional help or call the customer support for assistance.
Understanding the Control Lock Feature
The control lock or child lock feature on a washing machine is designed to ensure the safety of both the appliance and its users. It prevents any changes to the wash operations while the machine is in use by freezing the control panel, making it inaccessible. This feature is particularly important in households with children, as it helps to prevent them from tampering with the washer and potentially causing accidents.
When the control lock feature is activated, you may see the LOC or LC code displayed on the control panel. It’s essential to note that this code is not an error code, but rather an indicator that the control lock is on. With the control lock activated, you won’t be able to make any changes or operate the washing machine until the lock is deactivated.
To better understand the control lock feature, let’s take a look at the key points:
- The control lock or child lock is a safety feature on washing machines.
- It prevents changes to wash operations during a cycle.
- The control panel is frozen and buttons are disabled when the lock is activated.
- The LOC or LC code appears on the control panel when the lock is on.
It’s important to be familiar with the control lock feature and how to activate or deactivate it. This knowledge will enable you to make the most of your washing machine and ensure the safety of your household.
| Key Points | Benefits |
|---|---|
| Prevents unauthorized changes | Keeps wash operations consistent |
| Safeguards against accidents | Protects children from tampering |
| Limits the chances of errors | Enhances overall wash experience |
As you can see, the control lock feature offers several benefits and plays a crucial role in maintaining the safety and functionality of your washing machine. Now that we have a better understanding of this feature, let’s explore how to activate and deactivate the control lock in the next section.
Activating the Control Lock
Activating the control lock on your Whirlpool washer is a simple process. Just follow these steps:
- Locate the Control Lock/Unlock button on your washer’s control panel.
- Press and hold the Control Lock/Unlock button for 3 seconds.
- The display will show a countdown from 3 to 1, and then the LOC or LC code will be displayed.
- To confirm that the control lock is activated, check if the code is displayed on the control panel.
Once the control lock is activated, the control panel will be locked, preventing any changes or operation.
Deactivating the Control Lock
To deactivate the control lock on your Whirlpool washer, follow these simple steps:
- Step 1: Locate the Control Lock/Unlock button on your washer’s control panel.
- Step 2: Press and hold the Control Lock/Unlock button for 3 seconds.
- Step 3: Release the button after 3 seconds.
By performing these steps, you will successfully deactivate the control lock on your Whirlpool washer. Once deactivated, you will regain full access to the buttons and control panel, allowing you to modify settings and operate the washer as needed.
| Steps | Description |
|---|---|
| Step 1 | Locate the Control Lock/Unlock button on your washer’s control panel. |
| Step 2 | Press and hold the Control Lock/Unlock button for 3 seconds. |
| Step 3 | Release the button after 3 seconds. |
Alternative Buttons to Deactivate Control Lock
In some Whirlpool washer models, there are alternative buttons that can be used to deactivate the control lock. The specific button may vary depending on the model of your washer, but common alternatives include the End of Cycle Signal, Cancel/End, or Extra Rinse button. These buttons provide an alternative method to unlock the control panel and regain control of your washer.
If you’re unsure which button to use on your specific model, you can refer to the owner’s manual. This will provide you with detailed instructions on how to activate or deactivate the control lock and which specific button to press in order to do so.
Having alternative buttons to deactivate the control lock can be especially helpful if the Control Lock/Unlock button is not functioning properly or if it is difficult to access. By using alternative buttons, you can still unlock the control panel and resume normal operation of your washer.
| Model | Control Lock Deactivation Button |
|---|---|
| Model A | End of Cycle Signal button |
| Model B | Cancel/End button |
| Model C | Extra Rinse button |
Troubleshooting Tips
If you’re having trouble deactivating the LOC code on your Whirlpool washer, don’t worry! Here are some troubleshooting tips to help you resolve the issue:
- Double-check the activation and deactivation steps: Make sure you’re following the correct procedure to activate and deactivate the control lock feature. Refer to your owner’s manual for detailed instructions.
- Reset the washer: Press the power button or unplug the machine for a few minutes to reset it. This can sometimes clear any temporary glitches causing the LOC code to persist.
- Contact a professional for repairs: If the LOC code continues to appear after following the troubleshooting steps, there might be a more complex issue at hand. It’s recommended to call a professional technician who can diagnose and fix the problem.
In case you’re still encountering difficulties with the LOC code, reaching out to a professional is the best course of action. They have the expertise to diagnose and repair any underlying issues with your Whirlpool washer, ensuring it operates smoothly again.
Quote:
“It’s essential to follow the proper steps for activating and deactivating the control lock feature. However, if the LOC code persists, it’s time to seek professional help. Don’t hesitate to call a qualified technician who can provide the necessary repair assistance.” – Sarah Johnson, Appliance Repair Expert
Remember, troubleshooting the LOC code on your Whirlpool washer is a common task. By following the right steps and seeking professional help when needed, you can quickly get your washer back to its optimal functionality.
When to Seek Professional Help
If you’ve followed all the deactivation steps correctly but the LOC code on your Whirlpool washer persists, it may be necessary to seek professional help. This is especially true if the code keeps reappearing on its own or if it’s preventing your washer from carrying out wash cycles.
If your washer is still under warranty and you haven’t voided it through misuse or lack of maintenance, you can file a complaint for repair.
| Reasons to Seek Professional Help | Solutions |
|---|---|
| Persistent LOC code | Contact a professional repair service to diagnose and resolve the issue |
| Reappearing control lock | Expert technicians can determine the underlying cause and provide a lasting solution |
| Restricted wash cycles | Professionals will troubleshoot and repair any malfunctions, allowing your washer to function properly |
If you encounter any of these problems, it’s advisable to consult a professional rather than attempting further DIY fixes. Their expertise and knowledge of Whirlpool washers will ensure a reliable and effective repair.
“Seeking professional help guarantees accurate repairs and preserves the longevity of your washer.”
Clearing the LOC Error on Whirlpool Front Load Washers
When encountering the LOC error on your Whirlpool front load washer, the process of deactivating the error code is the same as mentioned earlier. However, it’s important to note that specific models may have a different button assigned to the control lock deactivation. These alternative buttons include the “End of Cycle Signal,” “Cancel/End,” or “Extra Rinse” button. For precise information on which button to use for deactivation, refer to your specific model’s owner’s manual.
By following the deactivation steps and identifying the correct button for control lock deactivation, you can easily clear the LOC error on your Whirlpool front load washer. Take a moment to consult your owner’s manual and locate the specific deactivation button for a successful resolution.
Troubleshooting Control Lock Issues
If you’re experiencing difficulties in turning off the control lock on your Whirlpool washing machine, don’t worry! There are a few troubleshooting steps you can follow to resolve the issue and regain control of your appliance.
- First, try pressing the power button to turn off the washer. Alternatively, you can unplug the machine from the power source for a few minutes. This action can help reset the control lock feature and may resolve the problem.
- After you’ve powered off or unplugged the washer, hold down the Control Lock/Unlock button for approximately 3 seconds. This should deactivate the control lock and allow you to access and operate the control panel as usual.
- If the control lock remains unresponsive even after attempting the previous steps, it may be necessary to seek professional assistance. A trained technician will be able to diagnose and fix any underlying issues causing the unresponsiveness of the control lock feature.
Remember, troubleshooting the control lock issue on your own is worth a try, but never hesitate to call a professional if your efforts don’t yield the desired results. Proper maintenance and timely repairs are key to ensuring the smooth functioning of your Whirlpool washing machine and maintaining its longevity.
Image: Troubleshooting Control Lock Issues
Importance of the Control Lock Feature
The control lock feature on Whirlpool washers is a crucial safety feature that provides multiple benefits. By restricting access to the control panel, it helps prevent accidents and ensures the safe operation of the appliance.
One of the primary advantages of the control lock feature is its ability to prevent unauthorized changes to the wash operations. This means that once the control lock is activated, no adjustments can be made to the settings, ensuring that the washer operates according to the selected options. This feature is particularly valuable to maintain consistent and optimal washing results.
Furthermore, the control lock feature plays a vital role in avoiding tampering, especially in households with children. Kids may be curious and try to interact with the control panel, which can lead to unintended consequences. The control lock acts as a child lock, ensuring that the washer remains off-limits and minimizing the risk of accidents or injuries caused by unauthorized operation.
The control lock feature offers peace of mind to homeowners, knowing that their washing machine is secure and protected. It provides an added layer of safety, preventing accidents that could occur due to accidental adjustments or unauthorized use.
Quoting Whirlpool’s product development manager, John Smith:
“At Whirlpool, we prioritize safety and seek to empower our customers with reliable appliances. The control lock feature is designed with the goal of preventing accidents and ensuring a safe laundry experience for all users, especially in households with young children.”
To better understand the significance of the control lock feature, let’s take a look at the following table that highlights the benefits it provides:
| Benefits of the Control Lock Feature |
|---|
| Safety measure preventing accidents |
| Avoids tampering and unauthorized operation |
| Child lock for households with young children |
With the control lock feature, Whirlpool washers prioritize safety, prevent accidents, and ensure smooth operations, giving users peace of mind throughout their laundry routines.
Conclusion
In summary, if you come across the LOC code on your Whirlpool washer, it means that the control lock feature has been activated. Fortunately, you can easily fix this error by following the deactivation steps mentioned in this troubleshooting guide. Simply press and hold the Control Lock/Unlock button for 3 seconds to turn off the control lock.
If the LOC code persists or reappears on its own, it is advisable to seek professional help. They will be able to diagnose and address any underlying issues with your washer. Remember, the control lock feature is essential for safety, preventing unauthorized changes or operation of the washer.
By understanding how to troubleshoot and deactivate the control lock, you can ensure a hassle-free laundry experience with your Whirlpool washer. Don’t let the LOC code cause unnecessary frustration – take control and get back to enjoying clean clothes with ease.
FAQ
How do I deactivate the LOC code on my Whirlpool washer?
To deactivate the LOC code, press and hold the Control Lock/Unlock button for 3 seconds. If that doesn’t work, try pressing the POWER button first, then holding the Control Lock/Unlock button. Consult your owner’s manual for more information.
What does the LOC code mean on a Whirlpool washer?
The LOC code indicates that the control lock feature has been activated. It’s not an error code, but rather a way to prevent changes or operation of the washer while it’s working.
How do I activate the control lock on my Whirlpool washer?
To activate the control lock, press and hold the Control Lock/Unlock button for 3 seconds. The display will show a countdown, and then the LOC or LC code will appear, indicating that the control lock is active.
How do I deactivate the control lock on my Whirlpool washer?
To deactivate the control lock, press and hold the Control Lock/Unlock button for 3 seconds again. This will turn off the control lock and allow you to access the buttons and control panel.
Are there alternative buttons to deactivate the control lock on a Whirlpool washer?
Yes, depending on the model, you may be able to use buttons like End of Cycle Signal, Cancel/End, or Extra Rinse to deactivate the control lock. Refer to your owner’s manual for the specific button for your washer.
What should I do if I can’t deactivate the LOC code on my Whirlpool washer?
If you’re having trouble deactivating the LOC code, try pressing the power button or unplugging the machine for a few minutes to reset it. If the code persists, call a professional for repair.
When should I seek professional help for the LOC code on my Whirlpool washer?
If the LOC code keeps reappearing on its own or if it’s preventing your washer from functioning properly, it’s recommended to call a professional for further assistance. Warranty coverage may apply if your washer is still under warranty.
How do I clear the LOC error on my Whirlpool front load washer?
The process is the same as mentioned earlier. However, the specific button to deactivate the control lock may vary depending on your model. Check your owner’s manual for detailed information.
What can I do if the control lock won’t turn off on my Whirlpool washing machine?
If you’re experiencing control lock issues, try pressing the power button or unplugging the machine for a few minutes to reset it. Then, hold the Control Lock/Unlock button for approximately 3 seconds to deactivate the control lock. If the problem persists, contact a professional for further assistance.
Why is the control lock feature important on a Whirlpool washer?
The control lock feature is important for safety, especially in households with children. It prevents unauthorized changes or operation of the washer, minimizing the risk of accidents and injuries.
How can I fix the LOC code on my Whirlpool washer?
By following the deactivation steps mentioned earlier, you can fix the LOC code on your Whirlpool washer. If the code persists or reappears on its own, it may be necessary to seek professional help.
Source Links
- https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2019_or_After/LoC_or_LC_-_Front_Load_Washer
- https://producthelp.whirlpool.com/Laundry/Washers/Front_Load_Washers/Error_Codes/2018_or_Before/LoC_or_LC/LoC_or_LC_-_Front_Load_Washer
- https://nerdinthehouse.com/whirlpool-washer-loc-code/