It’s generally advisable to reset your Maytag Bravos MCT washer after error clearance, control board replacement, and power interruption, among other situations. The question, however, is, ‘how do you do a Maytag Bravos MCT Washer reset?’
Start by emptying the drum, closing the lid, and putting the machine on standby. Then turn the knob selector counterclockwise once, clockwise thrice, then counterclockwise once, and clockwise once before pressing start.
Note that the above steps are only one way to reset your washer, but there are at least three other ways to do it that I’ll share with you. But before we do, let me help you understand the importance of resetting your Maytag Bravos MCT washer.
Here we go!
What Is A Maytag Bravos Washer Reset?
Washer reset means restarting your washer, mainly in the middle of a wash, when the machine becomes unresponsive or behaves weirdly. Some people use words like recalibrating and restarting when talking about washer reset.
Why Should You Reset Your Maytag Bravos MCT Washer?
Now that you know what a washer reset it; why should you consider it? Of what importance is a washer reset, and when should you reset your Maytag Bravos MCT?
Generally, you can reset your Maytag Bravos MCT washer during any of these situations:
a) After Error Clearance
It’s generally advisable to reset your Bravos MCT washer after every error clearance. That enables the machine to start error-free and prevent the same error once you run it.
b) Malfunctioning Softener/Detergent Dispenser
If your softener or detergent dispenser all of a sudden malfunctions. You should try cleaning it to get rid of the clog and then reset the washer. But if that doesn’t work and you opt to replace it, you should also reset your machine before use.
c) After A Power Spike
Your MCT washer may fail after a voltage oversupply. In such a case, you’ll need to wait for the voltage to normalize before resetting the washer. Doing so prevents any power issues when your washer starts to run.
d) After A Load Imbalance
A load imbalance will cause your MCT washer to produce a thumping/banging sound. In that case, you’ll need to stop the machine and rearrange the load before finally resetting the washer.
e) After A Power Interruption
Logically, your Bravos MCT washer will need a recalibration (reset) after a power interruption. That’ll help to clear any error code.
f) When Washer Can’t Move to The Next Cycle
The washer may not be able to move to the next cycle if the drive belt is bad. You’ll need to replace the drive belt and then reset your machine.
g) When The Lid Lock Can’t Open
Your MCT washer cannot run smoothly until the lid lock closes securely. If the lid lock switch is faulty, you’ll need to replace it first and restart your MCT washer.
h) When The Washer Is Making Weird Sounds
An MCT washer makes strange noises when something significant is wrong. It could be the drive belt that’s worn out or objects (coils and pins) trapped in the washer. The reason notwithstanding, you should rest your washer after getting rid of the cause of the weird sound.
i) When the Washer Vibrates Continuously
A faulty lid switch, drive belt, or any other major component can stop the washer suddenly. In such a case, it’s advisable to try resetting the machine after fixing it.
j) When The Washer Won’t Start
Your MCT washer may fail to start if it is unplugged for a long time. In such a case, it makes sense to plug it in and reset it to revive its operations quickly.
k) When The Machines Only Spins – No Agitation
Your Washer should not just spin but also agitate. If it’s not doing the latter, you should reset it right away and try washing.
l) After Changing the Control Board
The control board is like the engine that drives your MCT washer. You need to replace it if it fails and then reset your washer before starting to use it.
Generally, it’s advisable to reset the washer after replacing any major Maytag Bravos MCT washer part and not just the control board.
Maytag Bravos MCT Washer Reset in 4 Ways
You can reset your Maytag Bravos MCT in 4 ways discussed below:
1. The Recalibration Technique
The most typical Maytag Bravos MCT washer reset involves recalibrating it. Here’s how to go about it:
Step 1 – Washer Preparation
Start by emptying your MCT washer to ensure it neither has laundry nor water. After that, close the lid tightly.
Step 2 – Get into Standby
Now, plug in your washer, but it won’t turn on any LED/indicator to get into standby mode.
Step 3 – Cycle Selection
Locate the cycle-selector knob on your washer and turn it left once. Then turn the knob to the right three times (3 clicks). Lastly, turn the knob to the left once and to the right (once).
Step 4 – Rinse Activation
Wait for the rinse-only indicator to come on, and then press start to complete the washer’s recalibration.
Once you follow the above steps, you only have to wait for your MCT washer to recalibrate.
2. The 12 O’clock Technique
Note that this technique doesn’t work on all Maytag Bravos MCT washers, and that’s why it’s the second option. Here is how to go about it:
Step 1 – 12 O’clock Turn
Start by turning the cycle-selector knob complete turn to the right or counterclockwise until it rests on the 12 o’clock position.
Step 2 – Clockwise Turn
Turn the knob to the right four times and wait for the rinse indicator to come on.
Step 3 – Press Start
After the rinse indicator glares, press the start button to restart your washer.
3. The Power/Cancel Technique
Lastly, you can try resetting your washer by following these steps:
- Plug in your Washer and then press power/cancel
- Pick a new cycle and then press start/pause
- Now run some laundry to see if the washing machine has reset
4. The Unplug/Re-plug Technique
This is irrefutably the quickest and most effortless way to reset your Maytag Bravos MCT washer, even though it’s not 100% effective against the Washer’s error codes.
Just unplug the Washer from the power and wait for 10-15 minutes before plugging it back. If the machine does not reset after that, unplug it again but wait for 30 minutes this time around before re-plugging.
People Also Ask
1. How Do I Reset My Maytag MCT Washer?
The simplest way to reset your Maytag MCT washer is to unplug it from the power source and wait 15-30 minutes before plugging it back.
If that doesn’t work, recalibrate it using the steps in the manual. That includes putting the washer on standby and then turning the cycle selector once left, thrice right, once left again, and lastly, once to the right to reset the washer.
2. Do Maytag Washers Have a Reset Button?
Nowadays, Maytag washers don’t come with a reset button, forcing you to reset them by pressing the power/cancel button. Pressing this button allows you to pick a cycle and reset the washer. (https://blogs.20minutos.es/)
3. How Do I Reprogram My Maytag Washer?
You can reprogram your Maytag MCT washer by pressing pause/cancel and picking the correct wash cycle. You’ll then need to press start/pause to activate the reset. It’s an effective technique when your washer won’t move to the next cycle.
4. Why Is My Maytag Washer Stuck On Sensing?
Your Maytag washer is stuck on sensing because of a jammed /stuck keypad or because you failed to reset the machine after clearing the error code. But still, it could be because of a faulty control board, lid lock, shift actuator, sensor, timer, or inlet valve.
5. What Do You Do When Your Maytag Washer Won’t Start?
If your Maytag washer won’t start, try unplugging it and wait 10-15 minutes before plugging it.
You can also reset it by pressing power/start for about 5 seconds and then play/pause for another 5 seconds. If none of the restart methods works, take the washer to an expert.
Closing Remarks On Maytag Bravos MCT Washer Reset!
Now you know what it takes to reset your Maytag Bravos MCT after developing an issue. So, before calling an expert for a washer fault, try resetting the machine using any of the four techniques and see what happens. You could fix the issue in minutes and save yourself time and money.